|
Title: need some help with a mikohn cham 2 Post by: sandman179 on October 26, 2011, 11:29:07 PM ive been reading some post here, and im kinda new, where can i find the p.s.p software??my display only reads $2000, and doesnt go up in value when i play. Its a igt double diamonds tounament edition, with the led display, i cant seem to do anything with the display....is there a manual out there i can get a copy of as well. I see the 2 buttons and the switch next to it, when i go through the menu i dont understand most of the options...any help would be appreciated...thank you..... :103-
Title: Re: need some help with a mikohn cham 2 Post by: Foster on October 26, 2011, 11:51:27 PM More information on the IGT machine you have and which Cham II you have will help us help you.
:211- The machine has to be configured for link progressive for the machine to signal the cham II Also you have to configure the cham II with the PSP and may have to adjust some of the setting using the swtich and butttons on the cham II :172- Title: Re: need some help with a mikohn cham 2 Post by: sandman179 on October 27, 2011, 01:19:52 AM Hi, I have a igt s-plus tournament edition with a 341-075-00 cstlr stand alone. here is a pic of the mikohncham2
Title: Re: need some help with a mikohn cham 2 Post by: sandman179 on October 27, 2011, 01:21:51 AM here are some other pics.
Title: Re: need some help with a mikohn cham 2 Post by: sandman179 on October 27, 2011, 01:23:08 AM the led display 341-010-30, and the main cpu from the machine, s-plus
Title: Re: need some help with a mikohn cham 2 Post by: sandman179 on October 27, 2011, 01:25:01 AM the machine, and something else in there with a db 9, it has a number of 341-014-30
Title: Re: need some help with a mikohn cham 2 Post by: KirkLasVegas on October 27, 2011, 01:29:37 AM I have 2 more of those stand alone controllers and a handfull of displays to get rid of.....
If anyone is interested I can provide pictures and a price on the entire box of goodies... Kirk Title: Re: need some help with a mikohn cham 2 Post by: Foster on October 27, 2011, 02:57:00 AM The small board in your top box is not needed to make the Cham II+ function I would unplug it from the machine
You need to make a interface cable between a connector on machines motherboard J12 and J7 on the Cham II+ Which is the best way to interface the machine to the controller. The information on how to do so is in the manual I sent you. I see you have SP1148 you will need a set 90 to enable progressive if I remember right. I don't have the 1148 PSR handy to be sure. I will send you a PSR for a tournament enabled SP game chip. I recommend if the machine is not working, you get the basic machine functional (no progressive or tournament) before trying to do either progressive or tournament going. |