Welcome, Guest. Please login or register.
May 17, 2024, 04:03:56 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Bill Validators and Currency acceptors
| |-+  JCM DBV-45, DBV-145, and DBV-200 Bill Validators.
| | |-+  145 no credits bally 5500		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: 145 no credits bally 5500  (Read 4526 times)
paul
paul
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 548
« on: July 10, 2011, 01:06:59 AM »
trying to figure this out         145 dbv ido44          I install this in a bally 5500 takes bill stacks it gives no credits       then i take the same 145 and install it in a williams 400 DOT     it takes bill and gives credits
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #1 on: July 10, 2011, 02:11:27 AM »
The DBV200 SG / SH heads for the Bally ProSlots and the Wms DOTs aren't interchangeable -- at least, not on my machines. It's been so long since I've used 145s in them that I don't remember if those are interchangeable or not. CRS. Duh! 

That might be your issue.
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
paul
paul
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 548
« Reply #2 on: July 10, 2011, 11:54:12 AM »
Hay Stat try this no 8 dip on the 200 on for bally and off for williams
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #3 on: July 10, 2011, 12:51:31 PM »
Quote from: paul on July 10, 2011, 11:54:12 AM
Hay Stat try this no 8 dip on the 200 on for bally and off for williams

 Scratch Head Maybe I should just defer to the experts.

All three of my heads (2 Bally and 1 Wms) have all switches turned off, and are at least labeled as having exactly the same firmware and checksum. The JCM DBV200 manual doesn't show switch 8 being used alone for any configuration.

I bought my heads a long time ago from Fannini (Ben). I know that I tried to use the head intended for the Bally in the Wms and that it didn't work, and vice-versa. The Wms may -- at least in my case -- have a different lower circuit board. Scratch Head 

It's probably best to just disregard my posts. knockout

SF garfield
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
paul
paul
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 548
« Reply #4 on: July 10, 2011, 05:17:59 PM »
If you have IDO 44 Ido 45 chip for the 200 head the 8 switch flips between 044 for bally and 045 for williams
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #5 on: July 10, 2011, 08:04:36 PM »
Quote from: paul on July 10, 2011, 05:17:59 PM
If you have IDO 44 Ido 45 chip for the 200 head the 8 switch flips between 044 for bally and 045 for williams

 Scratch Head  According to the manual (and my memory), switch 10 changes the ID.

Here is a clip from the manual. The instructions for ID044/045 are at the bottom of page 8.


However, all of the switches are OFF (ID044) on both of my Bally 5500 heads and on my Wms Dotmation head, but as I said, my Dot might be weird.

* DBV200 ID044-045 setting.jpg (87.27 KB, 599x469 - viewed 275 times.)
« Last Edit: July 10, 2011, 08:45:40 PM by StatFreak » Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #6 on: July 10, 2011, 08:40:30 PM »
Paul, here's what I found regarding your dbv145. 

For the SH protocol, switch 8 (we're talking dbv145 now) is turned on if there is a stacker, and off if there isn't. That's all the info I could find. Changing that switch might work on your machines.

As I said earlier, CRS has set in and I don't remember how my old dbv145's were set.


Stat garfield

* DBV145 DIP settings.jpg (64.86 KB, 803x352 - viewed 293 times.)
« Last Edit: July 10, 2011, 08:47:11 PM by StatFreak » Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
paul
paul
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 548
« Reply #7 on: July 10, 2011, 09:30:40 PM »
you are correct from looking at the 145 and 8 dips and the 200 has 10 dips and it is 10 0n or off to go between the 044   045  on the 200
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #8 on: July 10, 2011, 10:02:11 PM »
Did you solve your dbv145 swapping problem? Scratch Head 2
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
AnotherTech
Guest
« Reply #9 on: July 10, 2011, 11:02:09 PM »
There was different software for the 145 for Bally and Williams, but it did seem to be interchangeable.  There was ID044P/045P for Bally and ID044W/045W for Williams.  I would often find Bally games with the W and Williams games with the P, that seemed to have been working fine.  Those were all 360/550 Williams games, so I'm not sure about the 400.

I wouldn't rule out the head yet, but I'm not convinced that it is the problem either.  Crazy Silly Me! Cry Laughing
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.091 seconds with 18 queries.