Welcome, Guest. Please login or register.
May 15, 2024, 06:14:28 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Bill Validators and Currency acceptors
| |-+  JCM DBV-45, DBV-145, and DBV-200 Bill Validators.
| | |-+  DBV 200 Troubles in Bally 5500 """FIXED it was the HARNESS"""		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: DBV 200 Troubles in Bally 5500 """FIXED it was the HARNESS"""  (Read 7801 times)
AcePeter
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 190
Offline Offline

Gender: Male
Posts: 242
« on: April 28, 2009, 11:13:46 PM »
Thanks to all ( StatFreak ) it was the harness and a special thanks to Buzz  applause  Hail who sent me one ( a Harness )                                     Well I looked and read all the post for my problem and still can't get it to work. The DBV-200 works in my other Bally 5500 ( I tested it ) and on this machine I can't figure it out. I turn the machine on. I feed it a bill and it takes it and it will not give credits, then after a few seconds of doing this it beeps then flashes red. The board is good too. Anyone have any other ideals to why this is happening?....Thanks for taking the time to read...
« Last Edit: May 09, 2009, 09:48:39 PM by AcePeter » Logged
If losing was a winner I'd be a millionaire!
NJB
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #1 on: April 28, 2009, 11:33:43 PM »
Bad wiring harness? Just a thought, as similar behavior happened to mine and that was the cause.
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
AcePeter
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 190
Offline Offline

Gender: Male
Posts: 242
« Reply #2 on: April 28, 2009, 11:57:00 PM »
Thanks I'll give that a try....
Logged
If losing was a winner I'd be a millionaire!
NJB
blueridgeslots
703 730-0821
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1262
Offline Offline

Gender: Male
Posts: 1779


703 730-0821


WWW
« Reply #3 on: April 29, 2009, 02:55:14 AM »
Did you try flipping Dipswitch 10
Logged
Selling Quality Tested and Guaranteed Slot Parts and Machines at Wholesale

http://stores.ebay.com/BLUE-RIDGE-SLOT-SERVICE
AcePeter
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 190
Offline Offline

Gender: Male
Posts: 242
« Reply #4 on: April 29, 2009, 08:26:10 AM »
Yes still no change (dip switch ). I'm gonna look into the harness that plugs into the motherboard and hopefully that will do it.
Thanks for your time...
Logged
If losing was a winner I'd be a millionaire!
NJB
AcePeter
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 190
Offline Offline

Gender: Male
Posts: 242
« Reply #5 on: May 02, 2009, 11:02:10 AM »
Well I changed the power supply and back plane and still no credits when I insert bill..I'm guessing it is the harness itself......Thanks to all that replied.... Scratch Head
« Last Edit: May 02, 2009, 07:38:56 PM by AcePeter » Logged
If losing was a winner I'd be a millionaire!
NJB
Ozzy
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 254
Offline Offline

Gender: Male
Posts: 221
« Reply #6 on: May 02, 2009, 12:07:16 PM »
Hi mate

One thing you might want to try is swapping IC U25 and IC U34 with each other on the MPU, also on the harness check out the grey wiring pin out (BV connector to Back Plane) against a good machine. Had exactly same problem some years back but did no document it. Good luck.


cheers


O Z ZY
Logged
AcePeter
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 190
Offline Offline

Gender: Male
Posts: 242
« Reply #7 on: May 03, 2009, 11:48:34 AM »
Thanks Ozzy
I'll give it a shot and report back.....................OUT
Logged
If losing was a winner I'd be a millionaire!
NJB
AcePeter
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 190
Offline Offline

Gender: Male
Posts: 242
« Reply #8 on: May 09, 2009, 09:50:27 PM »
Thanks to all ( StatFreak ) it was the harness and a special thanks to Buzz  applause  Hail who sent me one ( a Harness )                     
Logged
If losing was a winner I'd be a millionaire!
NJB
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #9 on: May 09, 2009, 10:08:35 PM »
I so happy you got it going Ace!   yes   Good job all! applause
Logged
tacman
NLG Document, Media Gallery and FAQ Writer
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 446
Offline Offline

Gender: Male
Posts: 1537


Genius in training.
« Reply #10 on: May 10, 2009, 09:46:05 AM »
Very nice, glad to hear you got it fixed!  applause

 Dan (tacman)
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #11 on: May 10, 2009, 10:02:47 AM »
I'm glad that you were able to get the validator up and running. yes applause propeller
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.084 seconds with 19 queries.