|
Title: Reel tilts in no paticular order? Post by: SQUIRREL NUTS on November 01, 2010, 10:15:13 PM Hello everyone. First I just want to thank everyone who has allready helped me, this site is awesome and you guys ROCK!. So I finally got the correct clear and set procedures and got my DD rolling. Now I keep getting different reel tilt codes in no particular order. Each time I clear them it starts up and gives another one right away. After checking and double checking all of my connections and harnesses, I swaped in a new board out of my cherry machine that I knew had no problems. With the new board, everything works good. Will the problem be with my board or the chip? :99-
Thanks! Jake Title: Re: Reel tilts in no paticular order? Post by: stayouttadabunker on November 01, 2010, 10:55:26 PM If you changed the chips when you changed the board -
then the problem lies with the board because your chips are okay - you follow ? However, if the reel chip was never seated properly to begin with and works now in the newer board - that's because the chip legs were probably oxidized and re-seating them worked wonders! This means the other board might still be okay.... :279- Title: Re: Reel tilts in no paticular order? Post by: SQUIRREL NUTS on November 01, 2010, 11:07:54 PM No, I just swaped in the new board with the cherry chips real quick to see if I had a problem with the harness. I will swap out the chips and see what happens.
Title: Re: Reel tilts in no paticular order? Post by: stayouttadabunker on November 01, 2010, 11:24:57 PM Good Man! I don't care what they say about ya! lol
Thanks for being the guinea pig....You're doing it for the sake of humanity! :293- It's a due process of elimination that will get you everywhere! :131- |