|
Title: 1492 Chassis Horz Position Post by: Neonkiss on November 06, 2010, 01:30:39 PM I have a 1492 Chassis in a CEI poker machine.
The horizontal position is not correct, too far to the left. It will not adjust enough with the adjustment pot on the top. Is there a user friendly additional adjustment on the board? Everything else on the picture looks great. Title: Re: 1492 Chassis Horz Position Post by: TZtech on November 06, 2010, 01:49:35 PM Hi
Check this Thread. BellBenchTech really knows his stuff when it comes to CRT's - http://newlifegames.net/nlg/index.php?topic=261.0 Ian Title: Re: 1492 Chassis Horz Position Post by: Neonkiss on November 06, 2010, 02:24:12 PM Thanks TZtech,
I did see the post by BellBenchTech and YES he knows his monitors. I was hoping to see that the board had an additional pot adjustment somewhere and the one on the front was just for some fine tuning. BellBenchTech, if you have any input I would appreciate it. :131- Title: Re: 1492 Chassis Horz Position Post by: Neonkiss on November 11, 2010, 11:16:07 PM Well I was at a complete loss with this one. :103-
I drove it down to a guy that repairs monitors here locally. He put it on his bench and ran a test signal. Poked around after reading the manual and changed some of the solder jumpers. It works perfect. I have had it up and working for 3 hours now with no issues. He has very reasonable prices and does good quality work for the cruse ship industry. :131- :244- :3- If anyone is interested here is his web page http://www.adrianelectronics.com/ (http://www.adrianelectronics.com/) |