New Life Games Tech Forums

I need hlep with the two wires coming off the harness on the door (orange and black) that go into the coin comparitor (CC-16 12VDC). I am missing the plastic connector at the coin comparitor and I need to know which location the orange and black wires go should I find a connector. It looks like the coin comparitor connection is 6 lugs and it connects to the two wires and then it connects to a white plastic connection on the door.

I would like to find a manual for the machine if anyone knows where I can get one. The label on the side shows Sigma Inc - Mech 3 Reel - WD model W3113.

Any help you can give me would be appreciated.

Can you perhaps snap a pick of the inside of your door, pls include the coin comparitor.
You can post 2 pics to each reply so feel free to make multiple replies.

I hate to tell you but Sigma's were sometimes/often the bastard love child(s) of the slot industry.

Many of the Sigmas are comprised of IGT, Bally and other parts.
Sigma often/occasionally purchased older machines as trade ins, then used the cabinets and parts and issued new creations.

I am sure many on this forum can help you but to find an exact manual for that slot may be a stretch.

Also can you describe the coin behavior. Is it accepting coins as credits ??

or are the coins just falling through to the coin tray or hopper ??

Here is the site for Rudys. They have free downloads for manual & more.
http://rudysdeals.com/index.php?route=product/category&path=72&page=2 (http://rudysdeals.com/index.php?route=product/category&path=72&page=2)
Ford

Thanks for the manual link, I will check it out.  Late last night I found a source on line for the plastic connector and wire pins for the comparitor connection. I will let you know if they work. I believe that the orange wire is 12vDC and goes to position 5 on the connector and the black wire is the ground and goes to position 6. I have attached 2 pcitures as suggested. Thanks for everyones help on this.