|
Title: Do they make these for S2000 machines? Post by: MrBellMan on November 15, 2010, 02:23:34 AM It's a blank plate to use instead of the bill acceptor bezel:
http://cgi.ebay.com/IGT-S-SLOT-MACHINE-BILL-VALIDATOR-COVER-PLATE-JCM-WBA-/140478092637?pt=LH_DefaultDomain_0&hash=item20b525955d (http://cgi.ebay.com/IGT-S-SLOT-MACHINE-BILL-VALIDATOR-COVER-PLATE-JCM-WBA-/140478092637?pt=LH_DefaultDomain_0&hash=item20b525955d) If so, where can I find some? I'm only interested in actual OEM/IGT product. Thanks! Title: Re: Do they make these for S2000 machines? Post by: brichter on November 15, 2010, 03:17:43 AM Man, I looked long and everywhere for one for my S+, finally found a guy who didn't have a BV. I installed one for him and asked for the plate as payment. :136-
Title: Re: Do they make these for S2000 machines? Post by: Foster on November 15, 2010, 04:20:12 AM I do not think IGT had anything like that made.
Title: Re: Do they make these for S2000 machines? Post by: Yoeddy1 on November 15, 2010, 04:42:27 AM Just put some duct tape over the hole. ;)
Title: Re: Do they make these for S2000 machines? Post by: reho33 on November 15, 2010, 11:41:34 AM Or try to cut the metal piece to fit the hole exactly, with very little gap, and fill in with adhesive, paint chrome, and sand or polish, and it should look like a solid piece with no gap!
Title: Re: Do they make these for S2000 machines? Post by: slot monkey on November 15, 2010, 11:59:52 AM brichter
Yeah, you never find one when you need it. I am thinking about making my own blank plate. Can you post actual dimensions and a picture of the back side, so I can see how it's mounted? Title: Re: Do they make these for S2000 machines? Post by: cowboygames on November 15, 2010, 12:49:39 PM With all the old S2000 doors people are getting rid of maybe someone could cut a few out. There's gotta be room to cut 3 or 4 out of each door.
Title: Re: Do they make these for S2000 machines? Post by: FORDSBS on November 15, 2010, 12:53:57 PM Did you check with John from Rudys Slots. He might have them.
Title: Re: Do they make these for S2000 machines? Post by: stayouttadabunker on November 15, 2010, 01:39:57 PM :299- I suppose it wouldn't be the hardest thing in the world to just get
some flat plate steel, spot weld a bolt to the back of it, round & buff the crap out of it and take it all to a place where they apply some chrome material to the face? :128- Isn't just some sort of a dunking/electrical process? I remember I used to turn pennies into silver when I was a kid...lol Title: Re: Do they make these for S2000 machines? Post by: brichter on November 15, 2010, 02:50:59 PM The hardest part will be getting the curve to match the door.
I'll see if I can get some pics, but it's just a flat chrome plate with 2 studs brazed on the back, and a couple of nuts. |