|
Title: Sigma 150 - low battery Post by: rjpohl on November 19, 2010, 12:02:45 AM Just left a guys house whose machine keeps coming up with a low battery error. After messing around with it for a few minutes the error cleared and we were able to play it with coins and bills. Turned it off to replace some bulbs and I turned it back on the low battery warning was there again. It never cleared before I left.
I have read a couple post that say to turn low battery warning off but setting SW2 post 7 to ON. Will the machine work then or do I need to do some type ram clear? Thanks Bob Title: Re: Sigma 150 - low battery Post by: Jimise on November 19, 2010, 02:29:40 AM The machine will work just fine with the battery turned off.
I have a couple that have no battery at all and work fine. No clear is required. Jim............... Title: Re: Sigma 150 - low battery Post by: rjpohl on November 19, 2010, 10:28:03 AM just to be clear,
turn machine off set sw2 post 7 to ON turn machine back on is this all that's needed? Title: Re: Sigma 150 - low battery Post by: Jimise on November 19, 2010, 11:54:54 PM Yes, With the machine off, And no credits on machine, Set #7 on sw2 on.
Power up machine, The display will tell you a dip switch has been changed. Turn the J/P key. You should be good to go!! |