New Life Games Tech Forums

**Reel Slots** Gaming Machines => SIGMA Reel Games. => Topic started by: Jimise on December 12, 2010, 03:53:24 PM



Title: SG 300 Treasure wheel bulbs
Post by: Jimise on December 12, 2010, 03:53:24 PM
Does anyone know what voltage the bulbs are in the treasure wheel?

 Would it be possible to change them out to leds?  Also, which leds would work best in the push buttons?

Thanks everyone!   :88-    Jim........


Title: Re: SG 300 Treasure wheel bulbs
Post by: Mr. Dinoman on December 12, 2010, 08:48:11 PM
I believe they are 12v T1 1/4" Wedge base...There is no direct replacement for the wheel...Your best bet is to get some supperbright LED's and solder them onto the main board with a loading resistor...Try one out first...They should just about last forever...Hope this helps...
Jimmy


Title: Re: SG 300 Treasure wheel bulbs
Post by: Jimise on December 26, 2010, 08:14:32 PM
Thanks Jimmy, I found these for the wheel bulbs and thought they might work.....
http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Fspecs%2FNEO.htm#photos (http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Fspecs%2FNEO.htm#photos)
 I got a few of these to try in the buttons. 
 http://cgi.ebay.com/2-WHITE-1-LED-WEDGE-BASE-LIGHT-BULB-194-168-1252-/300500941888?pt=LH_DefaultDomain_0&hash=item45f7407c40

Thanks for the help!  Jim... :89- 
I believe they are 12v T1 1/4" Wedge base...There is no direct replacement for the wheel...Your best bet is to get some supperbright LED's and solder them onto the main board with a loading resistor...Try one out first...They should just about last forever...Hope this helps...
Jimmy


Title: Re: SG 300 Treasure wheel bulbs
Post by: Jimise on January 02, 2011, 02:09:57 AM
Got my led bulbs installed in the buttons. They look nice and white now!