|
Title: DBV-200 - testing outside of the machine? Post by: poppo on December 14, 2010, 08:11:27 PM I did a search and came up empty. I know you can set the dip switches to test the head. I also know how to apply 110v to a spare power supply. But I can't get the BV to do anything (it works in the machine). Does something need to be jumpered to be able to test this thing outside of the machine? I actually want to test it along with the transport, so I figure something may have to simulate a cash box in place.
Title: Re: DBV-200 - testing outside of the machine? Post by: blueridgeslots on December 14, 2010, 08:51:40 PM To bench test the head, turn dipswitch 6 on (on the small bank of switches) power up, turn dip off and it will run and accept bill
Title: Re: DBV-200 - testing outside of the machine? Post by: poppo on December 14, 2010, 08:56:14 PM To bench test the head, turn dipswitch 6 on (on the small bank of switches) power up, turn dip off and it will run and accept bill :25- I missed the part in the maunal that said to turn the switches back off. Thanks. BTW, will it only work one time or can you keep running bills through it? Title: Re: DBV-200 - testing outside of the machine? Post by: blueridgeslots on December 14, 2010, 09:03:47 PM as many bills as you want until you turn off power
Title: Re: DBV-200 - testing outside of the machine? Post by: poppo on December 14, 2010, 09:52:57 PM as many bills as you want until you turn off power OK, got that to work. But I still can't get the transport to work, and I assume that has something to do with the cash box detection. Any ideas on how to trick it? It's actually the transport that I want to mess with out of the machine. |