|
Title: Motherboards? Post by: rjpohl on December 18, 2010, 03:03:30 PM Is the motherboard the same on a s+ sit down and and s+ upright?
I was working on a sit down that a fuse blew when the BV wire is plugged onto motherboard. If I leave the wire plugged into the motherboard and unplug it at the BV power supply it still blows the fuse. I looked at a s+ upright motherboard I have but don't think it is the same as the sit down. I'm doing this from memory, the sit down belongs to a customer. At first I thought the motherboard must be bad but it seems to me if it was bad it wouldn't matter if the harness was plugged in or not. I guess it's possible that the wire from motherboard to power supply could be bad. Any thoughts? thanks Bob Title: Re: Motherboards? Post by: stayouttadabunker on December 18, 2010, 04:28:26 PM I don't have a machine by me at the moment but I think there's 2 black header plugs
on the motherboard that have the same amount of pins but only one of them is for the DBV - the other one, I forget what it's for...? Make sure you're plugged into J/P6 from the DBV. Click to enlarge if needed...>>> Title: Re: Motherboards? Post by: Ron (r273) on December 18, 2010, 06:36:44 PM I don't have a machine by me at the moment but I think there's 2 black header plugs on the motherboard that have the same amount of pins but only one of them is for the DBV - the other one, I forget what it's for...? Make sure you're plugged into J/P6 from the DBV. Other one is J13 Printer. Ron (r273) Title: Re: Motherboards? Post by: stayouttadabunker on December 18, 2010, 10:37:15 PM Has anyone ever hooked up a ticket printer to an S+ using that J13 header?
|