New Life Games Tech Forums

I have an IGT 2000 early vision ready. I don't have wires on door next to play max credit button. If wires are there
all you do is hook the wires to button & it works. Does anyone know how to hook up if you don't have those wires?
I attached 2 pics. First is one w/wires. 2ND is the one I'm working on. I put button in but there are no wires.
It's programed for 4 diff. denom. All I need is the wires to prug in.
I say thanks for any help.
Ford

Remember, you need 4 wires for a button.
2 for the bulb and 2 for the micro-switch.

MICRO-SWITCH:
1st Wire) See the black wire w/red stripe that's doubled up in the other picture?
              You need to reconstruct that from the MAX Bet micro-switch.
              That goes to the bottom tab of the new micro-switch.
              It's for the micro-switch's ground wire.

2nd Wire) The solid yellow wire attached to the bottom open tab of the micro-switch
               runs all the way back to the door I/O Molex connector.
               You need a wire long enough to go from your new micro-switch back to that Molex,
               compete with a female micro-switch tab at one end and a pin at the other end in the
               proper pin location on the door I/O Molex housing.
               Follow the yellow one on the machine that has this wire configuration,
               to determine which pin location on that I/O Molex, is un-occupied.


LIGHTBULB:
3rd Wire) The solid red wire is also doubled up at the MAX Bet button
               but is the ground wire for the new bulb light.
              That's easily doubled-up from the MAX button other bulb tab and runs
               to one of the two light bulb tabs.

4th Wire) Same thing here as with the 2nd wire.
              This is the hot blue w/tan wire for new bulb's other tab.
               It needs to be long enough to go back to the door I/O Molex connector.
               Again, follow the other machine that has it already to know
               where to put the pin into the connector housing.

Once you have it all together and the settings into the options
correctly configured - you oughta be good to go!  :89-

Thanks Bunker. I have a job this weekend working on that.  :259- & a Merry Christmas.
Ford

You're welcome Fordsbs !
Have a very nice Merry Christmas too!
Don't stress out over little things...remember, this is just a fun hobby for most of us!  :89-

Thanks Bunker. We now have 4 denom.
Now I'm ready for a  :270- & a  :270- to all
Ford

And a money sucking crack-like addiction for others.  Not butt crack.