New Life Games Tech Forums

Can someone describe or send a pic of where to plug in the LED lights on a 6000 machine?  I put the led lights in the top box of my I game and i think it looks great.  I want to switch out the light on the top box for my 6000 now. I read that someone did it but couldn't find out how.


Thanks.


Here's what i bought : 12" DUAL WHITE COLD CATHODE LIGHT KIT MOD CASE BRIGHT (http://cgi.ebay.com/12-DUAL-WHITE-COLD-CATHODE-LIGHT-KIT-MOD-CASE-BRIGHT_W0QQitemZ380281735477QQcategoryZ51064QQcmdZViewItemQQ_trksidZp5197.m7QQ_trkparmsZalgo%3DLVI%26itu%3DUCI%26otn%3D4%26po%3DLVI%26ps%3D63%26clkid%3D5875064865297178173#ht_2620wt_746)








MODERATOR: Shortened displayed url to prevent horizontal scroll bar. SF :31-

There's an extra plug up there with a 3-pin Molex coming off the fluorescent lighting.
The thick Green wire is for the earth ground.
Use the White and Black wires for a 115VAC-to-12VDC walwarts transformer?

I actually have a power strip down below.
Only one of them is switchable with the machine's power switch though.
The rest are continuous power on all the time.

? Wallywarts?

Doesn't the LED light require 12v dc?

Munch looks a whole lot like a Cell phone charger.  Give me a day or so, I think I have a bunch of them that I have removed from slot machines and I will send you a couple of them.  Look in the old Garfield thread and these wall warts were addressed in detail.  2Moons posted quite a bit about them.

Is your address still 250-28 **********????????

Buzz thanks ! Now it makes perfect sense.   I feel so dumb.  All this time I had no idea that a wall wart was a transformer.  No need to send I have a bunch but thanks!!