New Life Games Tech Forums

Hello guys,

i have a Bally S6000 Bonus Frenzy and it worked fine for a couple of days. Now i got an error 80 when i start it and the top light is flashing once per second. I red a lot in the internet, this forum and the manual in the last hours but i didn't got a solution. I think the error means the checksum of some chips is wrong. So i should try a hard reset. I tried this with holding "TEST" and "PSEUDO COIN" when i power up but notrhing happend. I don't have the safe ram clear chips as i the video from GTASLOTS described but i hoped to do a complete reset without needing new chips.

Iam total newbie with this maschine. I would be so happy if anyone can help me.

Thanks a lot
Nico

1st thing is to check the battery make sure it is above 3v if it is lower i would install a new battery  2nd then do a complete clear

Battery is 3,65 V.
So i need the safe ram clear chips or can i do a clear without these chips??

yes you will need clear chips

so good.
thank you!

Have you ever cleared the ram before?   It's easy if you haven't done it before.

i haven't. Do you mean it is an easy procedure or easier the first time?
I watched that video from GTASLOTS and i think i will handle it :-)

just remember to hold the test and pseudo coin buttons as you boot the machine for a full clear.  My video shows a partial.

Thanks,
Wayne

Thank you Wayne, i've done the procedure and my maschine runs without problems now. Thank you all for your help.  :259-