|
Title: IGT S+ 61 error problem Post by: txrebel10 on January 05, 2011, 11:19:18 PM Pullin my hair out,,,got a board off of ebay[tested works ???]-put my game chips in pluged up and getting code 61 went through the reset process but cant get anywhere to remove,,can anyone help???
Thanks for any and all help,,,,,,,,Ronnie Title: Re: IGT S+ 61 error problem Post by: Firebird on January 05, 2011, 11:50:41 PM push and hold the self test button(little white button by the power switch) for about 10 seconds or until you see the 61-1 in the display, close the door, and turn the reset key, this should clear the 61 error off the machine.
Title: Re: IGT S+ 61 error problem Post by: txrebel10 on January 05, 2011, 11:55:15 PM Tryed but dont go to 61-1,,turn reset key with just 61 and get 0809 in paid,,1 in credits and coins played flashes 0-1
push and hold the self test button(little white button by the power switch) for about 10 seconds or until you see the 61-1 in the display, close the door, and turn the reset key, this should clear the 61 error off the machine. Title: Re: IGT S+ 61 error problem Post by: Firebird on January 05, 2011, 11:58:30 PM you have to push and hold the self test button until the machine makes a noise, then close machine and turn reset key, the numbers you are seeing by just closing the door and turning the reset key are the machines meters for coion in, coin out etc.
By the way, what type of machine are we trying to clear? Title: Re: IGT S+ 61 error problem Post by: a69mopar on January 06, 2011, 12:00:58 AM This must be an IGT S-Plus machine, not a 5500 (Bally)
W Title: Re: IGT S+ 61 error problem Post by: StatFreak on January 06, 2011, 12:59:55 AM This must be an IGT S-Plus machine, not a 5500 (Bally) W Agreed, since Bally's don't have a 61 code CMOS error. Wayne, I read the other thread. Push and hold the test button until you get the ding and the 61 1. Then close the door fully. Make sure that the latch is all the way down so that the optics meet and the machine sees the door as closed. THEN turn the jackpot key. Thread moved to the IGT S+ board and renamed. Duplicate thread on Bally board deleted. StatFreak :31- :nlg- Global Moderator Title: Re: IGT S+ 61 error problem Post by: txrebel10 on January 06, 2011, 01:08:31 AM double dimond, thinkin gonna have to clear
you have to push and hold the self test button until the machine makes a noise, then close machine and turn reset key, the numbers you are seeing by just closing the door and turning the reset key are the machines meters for coion in, coin out etc. By the way, what type of machine are we trying to clear? Title: Re: IGT S+ 61 error problem Post by: txrebel10 on January 06, 2011, 01:10:19 AM Sorry Mopar,my bad-will pay more attention-have a bally that tryin to get to work,waiting on power supply,,,,ordered clear chip for the IGT
Title: Re: IGT S+ 61 error problem Post by: JFWilder on March 08, 2013, 05:48:26 PM I'm sure you guys heard this before, but I just replaced the reel chip with a higher paying chip. I get a 61 error, and no matter how long I hold the test button, it only makes it go clear on the front except for saying 0 credits...the 61 goes away. I've tried that and hitting reset key and when I turn off and power back up, the 61 comes back. I don't get a ding even if I hold the test button all day. No...I don't have a RAM clear chip...but could use one probably but don't know how to use this. Any suggestions? Am I doing the test button wrong?
Title: Re: IGT S+ 61 error problem Post by: gposing on March 08, 2013, 08:20:45 PM I had this dreaded problem this week with my S+. Here is what I had to do.
1. Open the door and disconnect the door optic not on the door but the case. red and white wire 2. turn on the slot until the 61 appears. 3. Now press the reset button until the 61-1 is displayed 4. reconnect the optic 5. close the door and turn the key now After I got the slot working the reset button now works correctly. Gary |