New Life Games Tech Forums

my bill exchanger went bad and i took it to the slot man here in az, well he got sick and moved away and i am stuck with the machine pictured in the url without a bill exchanger. i would like to just convert to straight coin (quarters it is now). how hard is this and how can i do it myself? i have limited experience with slot machines but know computers pretty well. thanks...bobbym

(http://www.bobbymx.com/slot.jpg)






Moderator: Changed url to display image in post. SF :31-

 :238- Bobbym  :88-

I fixed your link to display the picture directly.


It appears that he took the DBV head and maybe the transport (it's hard to tell because it's washed out in the picture), but left the rest. Is the wiring harness still in the machine? If so, there would be three loose connectors that would plug into the Bill head coming from the machine's backplane board (two plug into the left side of the bill head, and one plugs into the bezel light.


In any case, replacing the Bill head (and the transport, if necessary) is a simple matter, and not expensive. You would want a DBV200 SG 044/045 head, but our vendors will know that already once you tell them you have a Bally 5500 ProSlot. You might need a set of clear chips, depending on the Mains installed (the chips that run the game).




Can you open the door and get some closeups of the validator assy.?  Also, can you pull the MPU board/tray (with power OFF) and take pictures of the socketed IC chips that have white stickers on them so that we can read the information on the stickers?  There will be six of them in two rows of three. :211-

You can post the pictures directly in the thread (two per post) or post them the way you did the first. Use the IMG command to display the pictures directly.

StatFreak :31-
:nlg-  Global Moderator

Also, it might help if you tell us exactly what went wrong with the validator in the first place.

awesome...i will follow up tomorrow. bm

Are there any error codes in the displays.  If it has set for very long I would guess you'll need to replace battery.  The low/dead battery code is 81.

Bob (rjpohl)

Now that you mention it, there does seem to be an error code displayed on the machine, but it's too blurry and washed out to read.

here's some pics of the machine.

(http://bobbymx.com/error_code1.jpg)
(http://bobbymx.com/bill_reader.jpg)
(http://bobbymx.com/error_code.jpg)

thanks for your help..this site kicks ass.

bobbym

It looks like he stripped it. Who was this guy and why didn't he return your property to you?!  :37-

You'll need a transport, cash can (or you can disable the sensor switch -- more later), the DBV200 head, and I believe a wiring harness -- I don't see the ends of the harness in the picture, but I can't really tell.

The 50 code is simply a door open message, and the 73 indicates that you've bumped or moved the third reel. Both will clear when you close the door. The two dots also indicate the that the door has been opened. They will disappear after you close the door and play one complete game.

By the way, what is that multi-colored wiring harness-looking thing wrapped around or near the handle base? :128-


We'll still need to see closeups of the chips on the board as I requested in reply #1 to determine if you'll need to also order clear chips, or you can copy the information yourself and post back.

If I understand your original post, you just want the machine to play on coins. If I'm correct why don't we get the machine working and address the BV later.

The main board ( MPU ) is located right below the reels. On the front of the tray you will see three buttons and one switch. The switch must be in the up position for coin play. Press the right hand button ( reset ) the 73 error you have should go away. Now close the door, if no other errors pop up you should be good to go. If this doesn't work, let us know what it doing, Bally's are pretty easy to fix.

As Bob suggested, If it's been any length of time since the battery on the MPU has been changed, your going to need one. They only last for a year or so.

close ups will be coming, the wiring harness to the right is a Christmas ornament/decor...does look like wire though.

error cleared and looks normal but the quarters just fall thru to the tray. thanks again...bm

hey guys...got it working, thanks so much for your help. this is a great site for slot owners no doubt. SLOT ON!!

Glad to hear it! :3- :3- What steps did you take to get it working?

not much other than what you guys said to do, also had to replace some lamp starters and lamps. system works great, next step is to change the glass and reel numbers and make it look and act like a different machine. i am very happy now...thanks again