|
Title: IGT mini photon progressive meter in a slant top Post by: knagl on September 16, 2008, 07:03:02 AM Originally posted by Cactusjack on 11/13/2007
CAUTION!!! Even though it looks like it will plug in, DO NOT PLUG your U/R IGT Prog display harness into the connector down on the Lower Module assy. Even though it seems to be the same number of pins, and IS where the prog display plugs in, the upright harness is NOT THE SAME as the one for a Slant top. If you have the plug up to the top box, you should be okay. If not, it has been drawn out somewhere else on this site how to make the wire harness. Progressives were rarely a part of Slant tops so most cabinets do not have the necessary harness already installed. Originally posted by Edski on 4/2/2006 Here is the correct cable for a Slant Top. The white plug is upside down of how it should go in the machine. The Red and Green wires plug in toward the back of the machine. (http://i35.tinypic.com/347en20.jpg) Originally posted by hotrod777 on 4/1/2006 (http://i36.tinypic.com/24l1ks8.jpg) |