|
Title: Question on setup S2000 Post by: FORDSBS on January 23, 2011, 03:47:15 PM Doing another game change. Got some questions.
What is the difference between WAMM & IPC? Next how do you get display from what is on video http://www.youtube.com/watch?v=Ht4HDjQsFos (http://www.youtube.com/watch?v=Ht4HDjQsFos) to 2 line? Thanks for help. Title: Re: Question on setup S2000 Post by: Yoeddy1 on January 25, 2011, 12:48:35 AM I asked the same question a few months ago regarding the display. I don't think there were any replies.
Jason Title: Re: Question on setup S2000 Post by: FORDSBS on January 25, 2011, 12:51:36 AM I'm not sure how I got it. I put a new game in (Sizzling 7 Times Pay) and this is what I got.
Ford Title: Re: Question on setup S2000 Post by: Tilt on January 25, 2011, 01:16:13 AM Split screen display is determined by the version chip. Put the one from your previous game in it and it will come back.
WAMM is a comm protocol for talking with backroom servers. Not sure about IPC. Title: Re: Question on setup S2000 Post by: FORDSBS on January 25, 2011, 01:22:44 AM Thanks Tilt. Now you got me straight on that.
Ford Title: Re: Question on setup S2000 Post by: stayouttadabunker on January 25, 2011, 03:03:15 AM I think WAMM is "Wide Area Money Management" and
IPC is "IGT Progressive Controller". Foster answers your other question below. Tilt was on track as well! However, the Version chips are more about determining whether your machine will have multi-denomination capabilities rather than having a split VFD screen. Here's a list of the Version chips>>> The version PROM controls what is available to meet special jurisdictional requirements and controls what certain features and options are available. The label indicates STEPPER VERSION and the version number: VERSION DESCRIPTION VS011CX0 single denomination –Colorado ONLY VS011CX1 multi-denomination –Colorado ONLY VS011GX0 single denomination VS011GX1 multi-denomination VS011GX2 multi-denomination with denomination-plus mode VS011GX3 multi-denomination with fractional-cent VS011IH0 single denomination –Netherlands ONLY VS011IH1 multi-denomination –Netherlands ONLY VS011IX0 single denomination –International VS011IX1 multi-denomination –International VS011NX4 single denomination –New Jersey ONLY VS011NX5 multi-denomination –New Jersey ONLY Title: Re: Question on setup S2000 Post by: Foster on January 25, 2011, 03:13:39 AM The Split display requires Game Chips that support it
SG 312,362,363 I did get VFD 02 and 07 to do the split pay using the above game chips. There may be other SG chips that do it but those are the ones I have used. Title: Re: Question on setup S2000 Post by: FORDSBS on January 25, 2011, 10:34:22 AM Thanks. I'm running a VS011GX0 & SG000312
Title: Re: Question on setup S2000 Post by: stayouttadabunker on January 25, 2011, 12:15:37 PM I know this is an IGT S2000 right Fordsbs?
Why is the title of this thread called "Setup 6000"? It's not a Bally 6000? :103- Or you meant like it's the 6,000th question on setting up an S2000? :72- Title: Re: Question on setup S2000 Post by: FORDSBS on January 25, 2011, 12:22:31 PM My scewup . I've been working on both. It's an IGT 2000. :279-
Title: Re: Question on setup S2000 Post by: stayouttadabunker on January 25, 2011, 12:25:10 PM ah that's okay Fordsbs!
I screw up ALL the time... :97- You got it working now like you want? I just read the PSR sheet for the SG00312 chip you have. I think you'll get the split display on the VFD screen if you have a certain VFD chip installed. I'd stick in a multi-denomination Version chip like VS011GX1 as well... Click on PSR SG00312 instruction below to enlarge if needed!>>> Title: Re: Question on setup S2000 Post by: Tilt on January 25, 2011, 12:53:15 PM The Split display requires Game Chips that support it SG 312,362,363 I did get VFD 02 and 07 to do the split pay using the above game chips. There may be other SG chips that do it but those are the ones I have used. Thanks Foster, I guess I just got lucky having SG chips installed that supported split screen. I replaced older VS008SX0 and VS009GX0 with VS011NX5s and that enabled it on mine. Title: Re: Question on setup S2000 Post by: FORDSBS on January 25, 2011, 01:16:10 PM ah that's okay Fordsbs! I think I'm going to keep it this way. It makes a different look on machine & my coin sound is different.I screw up ALL the time... :97- You got it working now like you want? I just read the PSR sheet for the SG00312 chip you have. I think you'll get the split display on the VFD screen if you have a certain VFD chip installed. I'd stick in a multi-denomination Version chip like VS011GX1 as well... Click on PSR SG00312 instruction below to enlarge if needed!>>> Ford Title: Re: Question on setup S2000 Post by: FORDSBS on January 25, 2011, 10:40:07 PM This is what it sounds like with these chips.
I KNOW COIN DOESN'T WORK RIGHT. It's fixed. http://www.youtube.com/watch?v=euzPokHcDwE (http://www.youtube.com/watch?v=euzPokHcDwE) Title: Re: Question on setup S2000 Post by: stayouttadabunker on January 26, 2011, 12:15:28 AM Ohh...that's a nice looking machine Fordsbs! :3-
I like the way you keep the deck all nice and shiny! :89- Title: Re: Question on setup S2000 Post by: FORDSBS on January 26, 2011, 12:20:36 AM Thanks Bunker. Last night I got the chrome polish out & went over machines.
Ford Title: Re: Question on setup S2000 Post by: reho33 on May 30, 2011, 02:44:08 PM I have a weird combo in mine, VS009GX0 (AZ) and SG000116. I get the split display. On an earlier version I did not. Some people complain about the split display causing burn-in but there is no option to switch between the 2. I for one like the split display. The only SG chips that gave a scrolling display on the bottom to announce PRINTER PAID and the available denominations was the 598's.
Title: Re: Question on setup S2000 Post by: CaptainHappy on May 30, 2011, 07:53:47 PM I know this is an IGT S2000 right Fordsbs? Why is the title of this thread called "Setup 6000"? It's not a Bally 6000? :103- Or you meant like it's the 6,000th question on setting up an S2000? :72- Bunker, What are you talking about??? :103- :103- :103- Are you feeling OK??? :200- :200- :200- The titles all look fine to me!!! :89- :89- :89- Ok I did an ADMIN trick to change all of them to read S2000 rather than 6000! :96- :96- :96- :208- Just messing with you! :71- CaptainHappy :95- Title: Re: Question on setup S2000 Post by: stayouttadabunker on May 31, 2011, 01:03:56 AM I tried to change the title of my S2000 conversion thread the other day
to include the name of the game but the software only let me change the title of a single post... That would I would have to change the title of every single post and couldn't change other members' titles in that thread...arghh!! :7- :277- I didn't know I needed ADMIN "tricks" to do that...oh well :96- It's basically screwed up anyways... :97- ADD>>>Hey! You fixed it thanks!!! |