|
Title: help with Sircoma Post by: mctuerk on January 23, 2011, 08:39:59 PM I recently purchased two old, non working video slots on ebay. a igt video slot, must be a fortune1,model# is 602 and a draw poker igt(Sircoma) model# sg-108. I’m no friend of video slots or poker machines, but I got it for next to nothing.(the auction price was € 6 for each). I have the fortune manual, but the Sircoma is quite different and i have neither manual nor schematics. The display shows jumbled chars. The reset button behind the hopper as well as the clear button on mainboard are not working. Can someone help please?
Title: Re: help with Sircoma Post by: monitorman on July 11, 2013, 02:50:23 AM This looks like bad sockets. Pull the MPU Board and carefully remove the MPU and Eproms and check and see if the leads are black. if the chip leads are black gently clean them with a pencil and reinstall them.
|