New Life Games Tech Forums

Arcade Games, Pinball, Crane Games, Redemption Games and Other Stuff => Other Arcade Games => Topic started by: arnie300 on January 26, 2011, 03:45:36 AM



Title: Dyna Cherry Master V1-01 Repair Questions
Post by: arnie300 on January 26, 2011, 03:45:36 AM
Hello everyone and thanks in advance for any help you can give.  I bought this cherry master off craigslist with the  Fruit Genie board installed in it. It also has a cherry master board v1.01. Finally the questions, 1. When I install the cherry master board I can't get any sound. I tried turning the volume on the board but it doesn't help. The fruit genie game has sound and plays normally. Second There are a lot of wires that have been repaired and some connections are not connected I would like to buy a new harness and buttons and change out as much as possible to make the machine look and perform better. Any help with links to purchase harness and new buttons and the schematics to hook harness correctly would be greatly appreciated.
Thanks Again
Arnie


Title: Re: Dyna Cherry Master V1-01 Repair Questions
Post by: Ron (r273) on January 26, 2011, 12:51:46 PM
 :238-   arnie300. I am no expert but I have a
couple machines myself. There are a lot of versions of Cherry Master boards.
Some have up to 7 Dip sets of switches to change the settings. Attached
is a schedule with 5 sets of dip switches. Dip switch #2 show volume off/on
is controlled by #6.

I would write down all your settings as it is now. And if it does not work you
can refer to it.

A far as changing the wires out I would get your Cherry Master board working
since your other game works. Other words "if it aint broke don't fix it." :72-

Good luck

Ron (r273)