|
Title: BUNKER ??? S-plus motherboard molex ## Post by: coorslight115 on January 28, 2011, 12:05:54 AM I got tired of searching and i know it is here...I need the Mouser # for the molex power connector that over heats on the s-plus motherboard all the time . 5 or 6 pin power connector :279-
Title: Re: BUNKER ??? S-plus motherboard molex ## Post by: Foster on January 28, 2011, 12:08:18 AM They are the 0.156" versions.
Title: Re: BUNKER ??? S-plus motherboard molex ## Post by: stayouttadabunker on January 28, 2011, 01:53:50 AM coorslight,
if you can wait till morning. I can give you the exact link to them and the pins from my work computer? My eyes are shot...been pixel-maneuvering all night....lol Title: Re: BUNKER ??? S-plus motherboard molex ## Post by: StatFreak on January 28, 2011, 08:05:46 AM coorslight, if you can wait till morning. I can give you the exact link to them and the pins from my work computer? My eyes are shot...been pixel-maneuvering all night....lol Was she hot? :127- :106- :110- Title: Re: BUNKER ??? S-plus motherboard molex ## Post by: stayouttadabunker on January 28, 2011, 12:34:35 PM Was she hot? :127- :106- :110- Actually a little bit of an eyesore....lol Okay, I dug around my old receipts from mouser and found that I bought these Molexes before... This is the link to the housings for the power Molex on the motherboard>>> http://www.mouser.com/ProductDetail/Molex/09-50-7061/?qs=jBHU5RPckUrTLh%2feulHi6g%3d%3d (http://www.mouser.com/ProductDetail/Molex/09-50-7061/?qs=jBHU5RPckUrTLh%2feulHi6g%3d%3d) This is the link for the terminal pins for above. All you need is the pins really...unless the Molex housing melted? lol >>> http://www.mouser.com/ProductDetail/Molex/08-52-0072/?qs=ZZBj1wiNDbnEqpNpmJNYsg%3d%3d (http://www.mouser.com/ProductDetail/Molex/08-52-0072/?qs=ZZBj1wiNDbnEqpNpmJNYsg%3d%3d) When restoring these power harnesses, it's important to solder the terminals to the 18-20 gauge wire. Crimping is for the birds.... Click on the photo to enlarge if needed. You will see all the information on the packaging bag>>> |