|
Title: NEED HELP INSTALLING NEW GAME CHIPS Post by: vegasbaby on February 06, 2011, 03:32:13 AM Hi
This is my first s2000 slot,I'm changing the game chips from a 10x pay game to a sizzling sevens game.I installed the first 3 chips as those 3 chips matched in wordage- #1 STEPPER-BASE #2 STEPPER GAME 1 #3 STEPPER GAME 2.All with the top grove area to right as like the ones i took out.I have one chip left to install its #v5011gx1 dose it go where the chip that's on the board reads step-ver vs006gx or dose it go where my 2nd choice is this chip reads SS7850.Dose my remaining chip fit in the slot chip marked step-ver vs006gx or dose it go where the other chip SS7850 is located.My guess is that my remaining chip gos where the chip reading step-ver v50006gx and if so do i just remove the other chip SS7850 completely or leave it in? THANKS FOR YOUR HELP! MARK Title: Re: NEED HELP INSTALLING NEW GAME CHIPS Post by: Bettor Slots on February 06, 2011, 03:38:24 AM Remove the SS chip and save it for when you want to put 10XPay back in. Replace the VS006 chip with your fancy new VSO11GX1 chip.
Title: Re: NEED HELP INSTALLING NEW GAME CHIPS Post by: Bettor Slots on February 06, 2011, 03:40:12 AM By the way your SB100087 supports enhanced sound if you want to get away from the ring a ding ding Legacy sound you are currently enjoying. Just add a piggy back MM2 board and a DSV042 sound simm.
Title: Re: NEED HELP INSTALLING NEW GAME CHIPS Post by: vegasbaby on February 06, 2011, 04:02:06 AM THANKS JIM,GOT THEM INSTALLED,IM GETTING CLOSER.
Hi PROBLEM SOLVEDThis is my first s2000 slot,I'm changing the game chips from a 10x pay game to a sizzling sevens game.I installed the first 3 chips as those 3 chips matched in wordage- #1 STEPPER-BASE #2 STEPPER GAME 1 #3 STEPPER GAME 2.All with the top grove area to right as like the ones i took out.I have one chip left to install its #v5011gx1 dose it go where the chip that's on the board reads step-ver vs006gx or dose it go where my 2nd choice is this chip reads SS7850.Dose my remaining chip fit in the slot chip marked step-ver vs006gx or dose it go where the other chip SS7850 is located.My guess is that my remaining chip gos where the chip reading step-ver v50006gx and if so do i just remove the other chip SS7850 completely or leave it in? THANKS FOR YOUR HELP! MARK |