New Life Games Tech Forums

I think I munched my Blazing 7's Pro 6000 Game History RAM (possibly by turning the machine off and on by unplugging it instead of power switch?  The problem came out of the blue).  The Lithium battery tests at 3.6v

The error code displayed is 83-7

I tried a DS1 SW8 Partial SafeRAM Clear but nothing came up, so I am assuming that I need the U28 U43 SafeRAM Clear EPROMS.  Where  / who is it best to get them from to ensure I get the right ones? 

Thank you in advance!

I have the Ram Clear set just give me a call 928-768-3113. Ben

Hey Wayne,

I have a set you can borrow if like and want to pick up shipping expense.  Otherwise you could buy a set from one of the pro's here on NLG to always have on hand.

Regards,

Jim

Hi "other Canadian Wayne", If you are going to be near Brampton, let me know, and bring your Board  I can show you how.

Thanks,
Wayne

Thank you all!  I have a set now.  I will let you know if things go awry.

Wayne
pinballisnotdead.com

Well the Bally ProSlot 6000 (Blazing 7's with Progressive) reset perfectly.  One slight hitch.  I was going to and forgot to go through the options and write down all the current settings before it malfunctioned.  And of course it didn't preserve the settings for operating with the Progressive award.

So now I have a whole slew of inter-related options settings that I will need help with getting it set up again.  It is a Mikhon (Cham II+ ? I'd have to check on this) single machine progressive unit. Does anyone know what I'd have to look at to figure out which type of unit, hookup options, etc.

As far as I can tell the minimum settings options that I need to figure out are:

02 Progressive Type: SPL, PPL, MAPS, S/MPI/SASv 3/OTT/SASv4  (In the back of my mind I want to say SPL, but that could be a false memory.)
07 Number of External JPs (in this case 0001 I guess)
78L (0001 - 0032) Unique machine ID for controller (again, I am thinking 0001, but ?)

There are a few others.  I am going to try plunking around, but if anyone has a suggested setting set to help start me out, it would be much appreciated.

Wayne
pinballisnotdead.com

Nope, I haven't been able to hit on the winning combination here.  Any ideas on how I can configure the progressive again?

Did you ever figure out the right progressive settings for the Mikohn and for your machine?

I RUN MY 6000 PROGRESSIVE AS

02= 05
07= 01
78 lo=01

HOPE THIS HELPS

It does.  :89-  What about the CHAMII+? Particularly the M and MS settings?

I BELIEVE IT IS M-08 AND MS-00 FOR BALLY PRO 5500 & 6000.

Thank you SLOTTEX. :3-

Hey all,

I am looking for clear chips for a bally proslot 6000. The system chips I have are U28, S6M1000A0008-00 & U43, S6M4000A0008-00. Does anyone know where I can fing a copy of SafeRAM chips. Thanks

Jim at Blueridgeslots has them, link to Blueridgeslots profile (http://newlifegames.net/nlg/index.php?action=profile;u=76; alt)  give hime a call or P.M. him.

Thanks,
Wayne

I have them here at Fannini Slots

I feel violated !

OK there are two chips and two vendors.... why don't you each sell one chip?  :25-

Gotten' from blueridgeslots. Man, is he quick!!!

Now I need to replace the MEI CASHFLOW SC BA that is in the Proslot 6000 with a WBA-13...and I do not have the correct cable for the WBA.  :103- Can anyone get me the pinout for the MEI CASHFLOW SC so I can make the cable I need? Thanks.

I would think you need the chassis for the wba(13) as well as the harness??

Good point...Got the full WBA unit

Are you saying you already have the wba assembly?  Or are you asking for one?  if you need one, Jim at Blueridge likely has them, if not then let me know (Jim).

Thanks,
Wayne

I have the WBA assembly, thanks

Hi
New to this area, i have a bally 5000 four reel slot machine, giving an error 31, hopper jam, in other forums saferam chips are mentioned for the Bally 6000, what particular chips are needed for the 5000 and where do you get hold of them from, thanks

Hello, seancalla, welcome to NLG!  :89- The vendors at the top of the page in the sponsor links should be able to help you.

 Dan (tacman)

Hi
I have a 5000 plus machine (i think), anyway managed to get it working, has about 6000 credits on it, how do you cancel them , also when you win the hopper constantly jams on payout the wheel that holds the coins seems to be moving in the opposite direction(clockwise as you look at it), i can get rid of the error 31 but the error 34 still is there and when the machine is on the machine wont go any further until it pays out, is there any way to bypass and cancel a payout or reset a payout or set machine to free play, i still have an error 31 with another machine, might be a problem with the hopper, any advice will be appreciated