|
Title: Looking for any information on a JCM UBA 10-11 SS bill acceptor. Post by: clown2948 on February 17, 2011, 04:24:55 PM I have a UBA 10-11 SS acceptor that quit. I need to know if anybody has information on these units. Wire diagram trouble shooting guide. Anything would help. Also what to look for if not working. Thanks. P.S. these came out of a Bally S 6000. 2007
Title: Re: Looking for any information on a JCM UBA 10-11 SS bill acceptor. Post by: stayouttadabunker on February 17, 2011, 04:41:58 PM Have you tried the JCM link on the homepage of NLG? >>>
Title: Re: Looking for any information on a JCM UBA 10-11 SS bill acceptor. Post by: ChizzleMonkey on December 26, 2011, 11:05:39 AM Go here for the UBA manual... http://www.jcmglobal.com/en/support/downloads.aspx It's under Product Manuals, a .pdf file. One thing to keep in mind about the UBA 10's and 11's are the jumpers on the cpu board(the board you see on the bottom of the UBA). The position of these jumpers are important when calibrating them. They are also important when changing between Netplex and RS232 protocols. It's all in the manual.
|