|
Title: Adding sound to a Bally E2212 Post by: proten on February 18, 2011, 03:14:18 AM I have a Bally E 2212-26 3 reel 5 coin slot
and I'm thinking of adding a sound board. How do you find out if the P1 chip ( # 552992 ) is compatible for sound ? Also i get a over pay of 1 coin but it is very random and no error, 1coin in every 10 to 20 pulls. Any ideas what to look at, I've checked the coin out switch, it's ok. Paul Title: Re: Adding sound to a Bally E2212 Post by: Amachanic on February 18, 2011, 11:23:55 AM Check on the back of the hopper motor. There is a lever that works like a brake. Make sure it's moving freely, I had on over paying and no error. Found it to be that brake was sticky. Barry at Foxsslots should know about the sound board question. If you need one I think I have a complete one out a a machine I parted last year.
Gary Title: Re: Adding sound to a Bally E2212 Post by: proten on February 18, 2011, 03:32:21 PM Thanks Amachanic
PM me the price and shipping for the sound board to 78620. Would you have the speaker, transformer and wiring also? Paul Title: Re: Adding sound to a Bally E2212 Post by: FOXSSLOTS1 on February 18, 2011, 03:42:32 PM your P1 prom does have the sound option. I do not have any sound parts for your machine.
Title: Re: Adding sound to a Bally E2212 Post by: proten on February 18, 2011, 03:48:29 PM Thanks Barry
Is the ribbon cable you have listed on ebay the right one for the sound card? Paul Title: Re: Adding sound to a Bally E2212 Post by: FOXSSLOTS1 on February 18, 2011, 04:41:12 PM have the ribbon cable that goes from the io board to the sound board - you will need the sound board - speaker - transformer - hopefully the wiring is in the machine.
Title: Re: Adding sound to a Bally E2212 Post by: Amachanic on February 18, 2011, 11:31:34 PM Proten... So far I have found the sound board and mounting plate and a ribbon cable. I have a box where I put all the wiring I stripped out of the machine. If it was in the machine I should have it. The only thing I threw out was the cabinet. So I guess I need to find a transformer now :103-, sure wish I remember what it looked like.. :279-
Title: Re: Adding sound to a Bally E2212 Post by: Amachanic on February 18, 2011, 11:32:53 PM PM Sent
Title: Re: Adding sound to a Bally E2212 Post by: Amachanic on February 18, 2011, 11:53:49 PM Barry... Does the transformer for the sound board plug into J1 on the sound board? J2 is the ribbon cable, and I'm guessing J3 is where the speaker plugs in? The manual doesn't say and I don't remember.
Title: Re: Adding sound to a Bally E2212 Post by: proten on February 19, 2011, 12:28:23 AM Here is the page from my Bally book.
Title: Re: Adding sound to a Bally E2212 Post by: Amachanic on February 19, 2011, 12:57:21 AM Yea I have that book too and that's the sound board I have.. I went through my box of wiring and found a small transformer #E122-157, 37-8424.. See pic.. The speaker is still missing, but I did see one on Ebay tonight... Heres that listing..
http://cgi.ebay.com/bally-slot-machine-speaker-/280630910612?pt=LH_DefaultDomain_0&hash=item4156e7de94 (http://cgi.ebay.com/bally-slot-machine-speaker-/280630910612?pt=LH_DefaultDomain_0&hash=item4156e7de94) Title: Re: Adding sound to a Bally E2212 Post by: StatFreak on February 19, 2011, 02:47:04 AM :259- Gary for digging through your things and searching ebay to help Paul. :131- :3- :3-
Stat :31- Title: Re: Adding sound to a Bally E2212 Post by: Amachanic on February 19, 2011, 12:04:53 PM Thanks Stat.. :204- Always glad to help where I can, Isn't that what Newlifegames is all about. :103- :99-
Title: Re: Adding sound to a Bally E2212 Post by: StatFreak on February 19, 2011, 04:14:29 PM Thanks Stat.. :204- Always glad to help where I can, Isn't that what Newlifegames is all about. :103- :99- :89- :89- :89- :89- :88- :88- :3- :3- :3- :3-Title: Re: Adding sound to a Bally E2212 Post by: proten on February 19, 2011, 09:31:55 PM Hi Amachanic
By the bally book I have, the transformer is not the right one. I haven't found the part number but the wire color is wrong. The transformer you have shows (Red & Black wires) in my book as for the Progressive display. The book shows the transformer that I need has Black & Green wires. Is this right? Paul Title: Re: Adding sound to a Bally E2212 Post by: FOXSSLOTS1 on February 19, 2011, 10:45:04 PM time for me to step in - the transformer E122-157 IS CORRECT - you need that - a speaker - 8 ohm - ribbon cable from the IO board (daughter board) for the IO board - the wiring - fuse block extra 5amp circuit (if fuse block has 6 fuses already - then you are all set).
Title: Re: Adding sound to a Bally E2212 Post by: proten on February 19, 2011, 10:56:28 PM Thanks again Barry
Paul Title: Re: Adding sound to a Bally E2212 Post by: Amachanic on February 20, 2011, 01:34:24 AM Thanks Barry... Gary
Paul.. Where do we stand? So your going to need this transformer, the sound board, ribbon cable. I have the complete wiring and fuse block from the machine it was removed from. The only thing I don't have is the speaker, or at least I can't find it. Does your machine have the 6 fuse block? I'm still a novice at this but learning more every day. Let me know what your going to need and we'll get it on your way.... Gary Title: Re: Adding sound to a Bally E2212 Post by: Amachanic on February 20, 2011, 05:49:27 PM Hey Paul... I found the speaker to go with the rest of the sound board parts if your still interested.. Let me know. :204- Thanks Gary
Title: Re: Adding sound to a Bally E2212 Post by: proten on February 21, 2011, 12:45:21 AM Hi Gary
I checked my machine and it has the 6 fuse block. I will take the sound board, 24" ribbon cable, speaker and transformer. PM me you paypal name and the amount due, I will send you payment. Paul Title: Re: Adding sound to a Bally E2212 Post by: proten on February 22, 2011, 03:16:36 AM Hi Gary
Payment sent and Thank you for taking the time to look for these parts. Thanks Barry for your help and expertise. It's guys like you two that make this such a great site. Paul Title: Re: Adding sound to a Bally E2212 Post by: Amachanic on February 22, 2011, 11:17:09 AM Paul, I'll get the package over to UPS today and I'll send you the tracking number later tonight. Good luck with your machine. Gary
Title: Re: Adding sound to a Bally E2212 Post by: Amachanic on February 23, 2011, 12:56:23 AM time for me to step in - the transformer E122-157 IS CORRECT - you need that - a speaker - 8 ohm - ribbon cable from the IO board (daughter board) for the IO board - the wiring - fuse block extra 5amp circuit (if fuse block has 6 fuses already - then you are all set). PM Sent Title: Re: Adding sound to a Bally E2212 Post by: Amachanic on February 23, 2011, 12:58:56 AM I just found this small board attached to my spare I/O Board tonight. Is this the Daughter board thats needed to make the sound board work?
Title: Re: Adding sound to a Bally E2212 Post by: FOXSSLOTS1 on February 23, 2011, 07:57:39 AM yes that is the daughter board - there is a small wire harness with a black and a red wire that attaches to it.
Title: Re: Adding sound to a Bally E2212 Post by: junkman on February 23, 2011, 09:05:24 AM do we have sound yet? let us know.
Title: Re: Adding sound to a Bally E2212 Post by: Amachanic on February 23, 2011, 11:07:29 AM Thanks again Barry.. :131- I'll go back into my parts box for that other wire. Is this the wire harness that goes to the speaker? I know the sound board plugs into the machines harness...
Gary PS... No sound yet Junkman, still getting all the parts together... Title: Re: Adding sound to a Bally E2212 Post by: proten on March 03, 2011, 02:08:46 AM WE GOT SOUND!!!!!!!!!!!!!!!
Thanks Gary (Amachanic) and Barry(FOXSSLOTS) , K 1 to you both. The addition of sound to my Bally E2000 slot is done. It isn't much of a sound system but it is a improvement over the bell. Now on to the next project. Paul Title: Re: Adding sound to a Bally E2212 Post by: Amachanic on March 03, 2011, 11:13:30 AM Great news Paul... I'm so glad I could help you with this project... :92-
|