|
Title: Bill acceptor bezel Post by: Tommy1 on February 20, 2011, 04:20:49 PM Hello,
I have an IGT PE + Poker machine that I replaced the bill acceptor and bezel. I got help to get the bill acceptor working but there is a 4 prong plug and wires that come off the bezel that there doesn't seem anywhere to plug in. Any suggestions? Thanks Tommy1 Title: Re: Bill acceptor bezel Post by: poppo on February 20, 2011, 05:11:02 PM Just to help out a little since this started in the BV area for another issue now resolved. The first picture is of his machine and the cable he has. The second picture is of my S+ where the bezel enable lines are connected to the BV (circled). The S+ bezel uses 4 wires. Two for power and those two enable lines. I don't know how a PE is wired, but since there are only two wires going to his bezel. I assume that either it's just lit all of the time, or that there is a separate board that enables it and just sents power to it. I also assume (but could be wrong) that he needs some sort of cable going to the BV unit like on on the S+.
|