|
Title: Power Supply giving the wrong voltage out **** FIXED IT **** Post by: Capt Mike on February 28, 2011, 06:21:29 PM Hi
This project got dumped on my lap, so I am looking for help.... I have a bunch of S+ machines(90), about 15 are doing this..... After they wouldn't turn on I started checking Voltage, Compared to a known working machine. I then switched power supply's and these machines are working fine. It seems that I have 1/2 the voltage on every pin.(compared to the working one) If this was on one unit I would just call it a bad unit, but 15 with the same problem???? Just bad luck or am I messing this up???? I was going to check and see if they where somehow set to 220V but according to the Manuel there are 10 pins on the transformer and I only have 6 total... :103- Thank you In advance for your help Title: Re: Power Supply giving the wrong voltage out **** FIXED IT **** Post by: junkman on March 14, 2011, 01:09:40 AM how did you fix it. let us know?
Title: Re: Power Supply giving the wrong voltage out **** FIXED IT **** Post by: Capt Mike on March 14, 2011, 08:36:44 AM They were set on 220, just changed them to 110...
Strange part was I have over 90 machines and 8 were set to 220... Makes no sense |