|
Title: VISION GAME "BILL ACCEPTOR NOT RESPONDING" Post by: CYRIL1973 on March 06, 2011, 11:29:26 AM Hi,
Machine: IGT VISION "FOX N HOUNDS" When I got the machine, the bill acceptor had been removed, probably kept by the casino technician. I took one working one from an S+ but no result. I then looked into the different threads then tested this: Self Test 4 I/O Tests Spin reels switch 3 Auto-Configure Netplex Devices. Press Spin Switch 2 times. display shows Netplex Auto-config in progress All I got was a " Bill ACCEPTOR NOT RESPONDING" Is a chip needed? If so, which one, please? I have attached a couple of pictures showing the inside of the machine, this loose cable puzzles me, would anyone be so kind as to tell me what it is? Thank you. Title: Re: VISION GAME "BILL ACCEPTOR NOT RESPONDING" Post by: cowboygames on March 06, 2011, 12:38:53 PM I could be mistaken, but I thought BVs were programmed differantly for S+ and S2000 games. The S2000 may not recognize the S+ BV even though they are both IGT games. If it's a WBA validator it can be reprogrammed for the S2000. Fanini slots in AZ is good at doing this.
Title: Re: VISION GAME "BILL ACCEPTOR NOT RESPONDING" Post by: CYRIL1973 on March 06, 2011, 03:08:16 PM The BV I tested is an Ardac...
Title: Re: VISION GAME "BILL ACCEPTOR NOT RESPONDING" Post by: CYRIL1973 on March 07, 2011, 08:26:49 AM Here are a couple of pictures of the plug where the bill acceptor should go.
Let's hope anyone could help me. Thanks a lot. |