|
Title: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 07:16:37 PM I just spend way more time than I planned to, taking this VLC 8825 apart.... but it was fun. The machine that wouldnt work, I figured was dead.... after pulling it apart, I found maybe a half dozen plugs not plugged in all the way on different boards. HA! Maybe the boards are all good?
Anyhow, I am going out now to take pictures of what I have.... if you need then, good.. if not, they wont take up much room. Stay tuned! Rick Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 08:42:49 PM OK, I got the pictures done.... I put them all up on facebook for now:
https://www.facebook.com/album.php?aid=90576&id=1643202410&l=26c74f9551 (https://www.facebook.com/album.php?aid=90576&id=1643202410&l=26c74f9551) I will be putting them up here next, 2 at a time.... if you see something you need, let me know... Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 08:44:35 PM 1. The gutted beast.... much lighter now.
2. Power supply.... Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 08:50:25 PM some boards....
Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 08:51:24 PM more boards
Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 08:53:33 PM 1. Tag off machine, in case anyone needs it.
2. small board.... Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 08:56:11 PM big boards.....
Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 08:57:34 PM and more... getting out of breath here :)
Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 08:58:34 PM label on part
Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 09:00:07 PM This is the tray that holds the counters and more... I left it complete, just unscrewed the hinge.
Bot views of the same tray. Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 09:01:25 PM This is a coin thing, I think, going to the bottom of the case where there is a hole.
Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 09:02:46 PM Top section of the machine.... outside and inside. It lit up, I can only assume the rest works.
Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 09:04:20 PM Bottom door, where coin goes in.... coin comparitor is gone, sent it off the other day... everything else is here.
Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 09:17:50 PM 1. Hinge piece to the lower door.
2. Bracket on the back of the bill holder, locking it into the case. Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 09:18:54 PM Bill validator case.... and the label on it.
This has been sold and shipped.... Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 09:20:25 PM 1. Bracket bill validator was on
2. Bill holder box - SOLD Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 09:34:42 PM more brackets.. lower one is from the coin hopper.
Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 09:36:08 PM woot! Last 2 pics!
Coin hopper Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 09:41:45 PM Other stuff I took off....
Monitor w/touch screen. It is still in the frame, damned heavy to ship I bet. Chrome trim around the monitor, excellent shape. Lock for round key, but no key. Rest lock that my reset key fits.... no key otherwise. The case is gone this week, need it out of the way. The rest I will put in boxes until someone wants them. If you are interested in anything, just make an offer and cover shipping... Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 10:04:30 PM oh ya... I also found a Bally Systems power supply... plug-in, 120v to 9Volt DC.... like an adapter that has some board plug-in on it.
Title: Re: VLC 8825 gutted and ready to be parted out. Post by: knagl on March 07, 2011, 10:33:15 PM K+ to you for taking the time to take and post all of those pictures and offer the parts. I hope someone is able to put them to good use.
The Bally power supply is likely a Mastercom (player tracking) supply. Was there a Bally Mastercom box in the top box (behind the player tracking panel)? Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 10:40:55 PM I beleive in that karma thing, what I do comes back to me in time.... good or bad. My goal is to give whomever needs the stuff a break while managing some beer money :)
I got no clue about the Mastercom thing.... if its in the pictures, then yes... Title: Re: VLC 8825 gutted and ready to be parted out. Post by: FORDSBS on March 07, 2011, 10:55:35 PM Top section of the machine.... outside and inside. It lit up, I can only assume the rest works. pIC WITH THIS POST ARE TRACKING FOR MASTERCOM. 12th post K+ to you for taking the time to take and post all of those pictures and offer the parts. I hope someone is able to put them to good use. The Bally power supply is likely a Mastercom (player tracking) supply. Was there a Bally Mastercom box in the top box (behind the player tracking panel)? Title: Re: VLC 8825 gutted and ready to be parted out. Post by: Foster on March 07, 2011, 11:12:46 PM What player tracking parts are those?
IF a Bally 250 I would not mind having them Title: Re: VLC 8825 gutted and ready to be parted out. Post by: FORDSBS on March 07, 2011, 11:17:11 PM http://newlifegames.net/nlg/index.php?action=dlattach;topic=11895.0;attach=31908 (http://newlifegames.net/nlg/index.php?action=dlattach;topic=11895.0;attach=31908)
Pic in 12th post Ford Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 11:45:58 PM Is it the thing the casino card goes into? I will check it.
Title: Re: VLC 8825 gutted and ready to be parted out. Post by: FORDSBS on March 07, 2011, 11:49:46 PM YEP I think that's what Foster is looking for. See if there was anything else hooked to it.
Ford Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 07, 2011, 11:54:22 PM ok.. here is what I found....
The thing the card goes into is: Neuron Corp (Japan) Model MCR-360N-1R-0102 Key pad connector board is 305105 Keypad is 105123A Title: Re: VLC 8825 gutted and ready to be parted out. Post by: FORDSBS on March 07, 2011, 11:57:15 PM We'll have to see if Foster gets back to you.
I'm just the guy in the middle Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 08, 2011, 12:00:15 AM hahaha.. thanks for the help.. you guys know WAY more than I do about these.
Title: Re: VLC 8825 gutted and ready to be parted out. Post by: FORDSBS on March 08, 2011, 12:08:05 AM hahaha.. thanks for the help.. you guys know WAY more than I do about these. Not really. Just a salesperson @ heart trying to help you sell. Ford Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 08, 2011, 12:12:53 AM I am too nice of a guy to be a good salesman....
Title: Re: VLC 8825 gutted and ready to be parted out. Post by: Foster on March 08, 2011, 12:47:38 AM Do you remember of the player tracking parts had anything connected to it.
Before you started taking the machine apart. Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 08, 2011, 02:10:25 AM the ribbon cable is still there.... not sure what it hooked to.
Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 08, 2011, 02:32:06 AM I found the board it hooked to....
http://newlifegames.net/nlg/index.php?action=dlattach;topic=11895.0;attach=31896;image (http://newlifegames.net/nlg/index.php?action=dlattach;topic=11895.0;attach=31896;image) Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on March 08, 2011, 01:31:42 PM I forgot to mention 2 other parts.....
Candle on top... has red and white area on it, which is paper inside the clear plastic. Coin tray Title: Re: VLC 8825 gutted and ready to be parted out. Post by: rickh on April 04, 2011, 02:31:24 AM Last call for parts... gonna stash these away and start tossing them soon.
Title: Re: VLC 8825 gutted and ready to be parted out. Post by: drfreeze1739 on February 05, 2012, 05:59:05 AM Hello..
Dose any on know where the wires from the maters go to??? I got one missing the meters.... I got metters now but dont know where they hook up to... Any help from anyone???? |