|
Title: Setec MK5PFC voltage conversion issue Post by: michaelmann on March 09, 2011, 08:16:58 PM Hi all, i have an Aristocrat Xcite MK6 machine with a Setec MK5PFC power supply. the machine was purchased from Australia and work fine with 240v, however when running on 110 there is no power at all is there some sort of *switch* to flick or converter that needs to be installed in order for this to work correctly? i am led to believe that the older MK5 models or even MK4 have a switch within the power supply is this fact or fiction?
any help on converting these or service information on these power supplies will be greatly appreciated. Title: Re: Setec MK5PFC voltage conversion issue Post by: proten on March 09, 2011, 09:19:30 PM From all the manuals I have found there is a switch like
the switch on the back of your desk top PS. It is resesed in the PS and you will need a pick or small screw driver to side it to the 110 volt setting. Title: Re: Setec MK5PFC voltage conversion issue Post by: michaelmann on March 09, 2011, 10:11:22 PM Thank you!! do you have a photo of this or perhaps a copy of the manual that i could view?
Title: Re: Setec MK5PFC voltage conversion issue Post by: proten on March 09, 2011, 11:38:34 PM Sorry I was looking a schematics and don't have any pictures.
If you look around where the power cord connects to the P/S most of the time the switch next to it. |