|
Title: error code 31 Ballys 6000 Post by: arcade on March 10, 2011, 01:54:18 PM Brand new here and also to the machine help !
Title: Re: error code 31 Ballys 6000 Post by: Ron (r273) on March 10, 2011, 04:29:03 PM :238- arcade!
I do not know much about Ballys but while you wait on one of our experts, here is a list of error codes from my library. Ron (r273) Title: Re: error code 31 Ballys 6000 Post by: arcade on March 10, 2011, 05:10:21 PM Thanks ,however I could not open the file . I do have error codes , just not sure exactly what they mean or just where or what the parts are the codes refer to . Ex. hopper's coin out optic may need to be cleaned. I don't know where this optic is located .
Title: Re: error code 31 Ballys 6000 Post by: a69mopar on March 10, 2011, 08:58:35 PM 31 Hopper Coin-Out
Jam The hopper's coin-out optic has been blocked too long (see Troubleshooting, The optic is above the coin knife. It works like this: The coins go in the hopper bowl, The motor turns the pinwheel which pushes coins around from the bottom of the hopper bowlto the coin knife which lifts them through (the pin on the pinwheel pushes it up and over like a ramp) the hopper coin out optics and then they roll out through the door slot into the tray. Sometimes a piece of a coin wrapper or a dust bunny can block it which can give that code. The optic is a black u shaped piece with wires coming from it. Thanks, Wayne Title: Re: error code 31 Ballys 6000 Post by: arcade on March 11, 2011, 04:19:44 PM Wayne,
Thanks for the info. for now all is well with the machine. Really appreciate you taking the time to help me . I have barely ever opened the machine, thus I know very little about it. If you could suggest any reading material on parts location or minor repairs that would be helpful. Thanks again. John Title: Re: error code 31 Ballys 6000 Post by: paul on March 13, 2011, 01:02:26 AM did you take hopper out with machine on this will give a 31 code You will have to clear machine to get rid of code
Title: Re: error code 31 Ballys 6000 Post by: arcade on March 13, 2011, 01:14:50 PM Seeing that I am new to all this, I don't know what or how to clear the machine .
Thanks Title: Re: error code 31 Ballys 6000 Post by: a69mopar on March 13, 2011, 09:30:46 PM To clear a 31 code, you shouldn't need to clear the machine. Putting the hopper back in and closing the door should clear. If there is an issue with the hopper control board, then the code may not clear. For this, I would check if a coin , dirt, or coin wrapper are blocking the optic. maybe I'll post a pic later.
Thanks, Wayne Below is for future reference. http://www.youtube.com/watch?v=fJ-yRz4AnYc (http://www.youtube.com/watch?v=fJ-yRz4AnYc) ***For a complete clear, make sure you hold the test and pseudo coin buttons on the main board prior to clearing.*** Title: Re: error code 31 Ballys 6000 Post by: arcade on March 13, 2011, 11:15:18 PM Wayne,
Thanks for all the information. The machine is working fine now. John Title: Re: error code 31 Ballys 6000 Post by: Frenglish on April 26, 2011, 07:08:19 PM Great help, my machine also gave a code 31 and thanks to you, it now works again.
|