New Life Games Tech Forums

Anyone know how to clear this? Also getting a Closure MB on one of my other machines, how do I clear that?
On the one with SAS down, I am also getting a flashing truck on bi bill validator bezel?
Can I use the same clear and key chip that I have used on my other S2000 games? The CPU is a little different on these machines, the backpane that it slides into is also different from my othe S2000 slots.
My slear chip just says "clear chip s2000" my key chip says "Key 31"

Any help will be greatly appreciated.

Thanks,

David

Use the Key chip and change Validation to standard and turn off security etc,

You can try that clear chip on those, but if the boards and backplanes are differant you may have enhanced board sets in those. Won't hurt anything to try, I have experience in this :89- The MB error I believe has to do with your cashbox door. If you look at the secondary sas settings on a machine not showing that error you can find out how they're suppose to be set and use your key chip to adjust them thus avoiding the need for a clear at all though

Turn off Security and what else? Sorry if this is a simple question but I am still new to these slots.

Thanks,

David

7.2.1.1 Set SAS Validation to Standard
7.2.1.2 Validation Security Disabled.
7.2.1.4 Handpay Validation (no validation or receipt)

Play one game -- the machine is ready to go and is waiting to play a game.

"Closure" means that the door had been open, and then was closed.  The message will go away after the completion of one paid game.

If you open the main door, you'll get a Door Open M message when it's open, and a Closure M when you close it.  The bill validator stacker door (the door to the "cash can") is "B".

Thanks for all your help, I both of them up and running.