|
Title: 2" Player Tracking cover for IGT S+ Post by: sblair on March 18, 2011, 03:00:33 AM This one is driving me nuts. I'm looking for a blank plate to cover the player tracking on this IGT S+ slot. The catch is that it is 2" high and not the more common 3" high player tracking module.
At this point I'd be happy if I could even find a regular plate that would go with this machine. See photo: http://www.litespeeddesign.com/gallery/v/Games+For+Sale/Slot+Brackets+002.JPG.html Any help on a source would be appreciated! Thanks. Scott Title: Re: 2" Player Tracking cover for IGT S+ Post by: stayouttadabunker on March 18, 2011, 04:08:23 AM It's possible that "slots4home" might have one?
They are hard to find. I got one for mine last year from him. Title: Re: 2" Player Tracking cover for IGT S+ Post by: poppo on March 18, 2011, 09:34:37 AM Just a sugestion since you already have the back piece to hold the glass. Just cut a piece of black laminate or even thick poster board and stick it on there with a little bit of thin double sided tape (like the poster tape or carpet tape). That way you can still pull it off when changing glass or whatever. Even if you find the matching cover or bracket/cover set, you will still need to fabricate a cover for the cover.
Title: Re: 2" Player Tracking cover for IGT S+ Post by: reho33 on March 18, 2011, 10:20:14 AM I think a piece of cove base pasted onto a solid surface (wood, metal, etc) then use velcro strips or krazy glue some metal tabs in the same areas that the slots would be in onto the cove base and put in place.
Title: Re: 2" Player Tracking cover for IGT S+ Post by: Tilt on March 18, 2011, 12:15:15 PM PM fanninislots. He had and may still have some new ones. I bought a couple from him for my S+ and am very happy with them.
Title: Re: 2" Player Tracking cover for IGT S+ Post by: coorslight115 on March 18, 2011, 10:13:44 PM This one is driving me nuts. I'm looking for a blank plate to cover the player tracking on this IGT S+ slot. The catch is that it is 2" high and not the more common 3" high player tracking module. At this point I'd be happy if I could even find a regular plate that would go with this machine. See photo: http://www.litespeeddesign.com/gallery/v/Games+For+Sale/Slot+Brackets+002.JPG.html Any help on a source would be appreciated! Thanks. Scott I might have one. Let me look and take a picture for you later tonight. Title: Re: 2" Player Tracking cover for IGT S+ Post by: coorslight115 on March 19, 2011, 12:58:10 PM I have this one. :3- :3-
PM if interested Title: Re: 2" Player Tracking cover for IGT S+ Post by: coorslight115 on March 19, 2011, 12:59:52 PM couple more pics
Title: Re: 2" Player Tracking cover for IGT S+ Post by: poppo on March 19, 2011, 02:55:55 PM You almost have to get a matching set since the tabs/slots seem to always be in different places. One of mine (both are 2" like that) has the tabs on the ends like that one, and the other has them more inboard like in sblair's picture.
Title: Re: 2" Player Tracking cover for IGT S+ Post by: Buzz on March 19, 2011, 05:35:13 PM I have been to the shop Ben gets these tracker bars from. The man has a shear and a break and will make them any size you request and place the tabs where ever you wish. If you buy 10 or more you can get a darn good discount.
|