|
Title: IGT S-Plus Upright Pull Handle Problems Solved Post by: rickhunter on September 16, 2008, 01:45:23 PM Credit of this article and photos go to Kenneth Risenhoover:
Ok.....I was having some issues with my pull handle on a machine I just got at a garage sale......two issues really. 1. I had reel spin sounds but no click when the reels stopped. 2. The pull handle could be pulled anytime....it never locked. Solutions were as follows.... 1. solenoid on the handle assembly had been disconnected. Reconnected and I got my reel stop sounds. 2. the lever that locks the tab on the pull handle seemed to be out of adjustment.......readjusted and now the handle locks. I was reluctant to try and tackle this job mainly because I had never been into the handle assembly plus it looked very difficult.....being behind the DBV assembly. It was actually easy........ I took some pics in case there is someone else out there having pull handle issues.....hope they help! Update........adding the word slot arm so it is searchable that way also! |