|
Title: SEGAI SE - M33C14 Post by: proten on March 23, 2011, 03:39:17 AM Hi
I have a Bally Pro Video that I picked up on Craig's List. New battery and a ram clear its up and running. The problem I'm having is I can't adjust the horizontal size of the display. The adj. pot is stiff and when I turn it there seems to be no change. I have looked for parts and repair manuals but came up with nothing. Is this a repairable setup or do I need to look at changing out the display for some this different? Thanks for your help Paul Title: Re: SEGAI SE - M33C14 Post by: Firebird on March 25, 2011, 03:17:42 AM I would do 2 things before replacing it, 1) check the adjustment pot with a meter to see if it is working properly, replace if not. 2) check the capacitors on the board and replace bad ones.
Title: Re: SEGAI SE - M33C14 Post by: proten on March 25, 2011, 03:36:30 AM Thanks Firebird
Was there a problem with this brand ? I can't find any info on it and I'm starting to think that the SEGAI brand wasn't any good. Thanks again Paul Title: Re: SEGAI SE - M33C14 Post by: Firebird on March 25, 2011, 04:57:12 AM I don't have experience with SEGAi myself, but with kortek and ceronix this is usually a bad capacitor on the board.
Title: Re: SEGAI SE - M33C14 Post by: proten on April 11, 2011, 10:41:26 PM I checked the variable pot and and it checked out.
What's next to check? I have a manual for the MC34xx but I'm not sure if it is the same as the MC33xx. I don't have a way to check the caps but none of them show any signs of leaking or bulging. Any ones help would be great. Paul |