|
Title: i fixed my problem but dont know how Post by: brianfink on March 23, 2011, 06:22:16 PM i own a couple of s2000 machines and one would give me an error every time i turned it on. base eprom crc failure or something like that so i switched the boards on the advice of a friend to try and figure out what the problem was and i haven't had any problems at all for about two months now. can anyone explane.
Title: Re: i fixed my problem but dont know how Post by: poppo on March 23, 2011, 07:49:02 PM I'm assuming you have the original board back in? If so, it may have just been a connector issue that re-seating fixed.
Title: Re: i fixed my problem but dont know how Post by: brianfink on March 24, 2011, 11:36:55 AM no i switched the chips in the boards i tryed taking the boards out and making sure all the chips were in the sockets securely before i switched anything
Title: Re: i fixed my problem but dont know how Post by: poppo on March 24, 2011, 11:42:45 AM Still could have just been a bad connection somewhere. Unfortunately, those types of problems can be :277- to track down.
|