|
Title: E 2000 reel or payout problem Post by: junkman on March 23, 2011, 11:35:37 PM I have a bally e 2000 with a problem sometimes when it hits 3 bars it pays 5coins the next time it will pay 10coins like it should. And on another one is when it hits 5bar 5bar bar it payed 50 coins when it should have payed 5 coins can anyone tell me what's the problem so I can correct it.
Title: Re: E 2000 reel or payout problem Post by: FOXSSLOTS1 on March 24, 2011, 01:02:30 AM does the machine tilt? does the amount of coins dispensed show correctly on the win meter? did this game work correctly before this payout problem?
Title: Re: E 2000 reel or payout problem Post by: junkman on March 24, 2011, 01:15:48 AM I bought the game awhile back a got it working. I played it a little seemed to be fine. So I put it away. So I cold finish another machine. Its done so I started making minor repairs to the machine. I bought glass and reel stips and chip from you about a month ago mine was junk. Put everything in the. Excpt the chip u sent. It was thE same game. Thanks
Title: Re: E 2000 reel or payout problem Post by: junkman on March 24, 2011, 08:41:20 AM No tilt. The coins that it pays out is what's on the meter.
Title: Re: E 2000 reel or payout problem Post by: FOXSSLOTS1 on March 24, 2011, 04:12:21 PM next time you get a mispay - do a 5 test and see what the reel readers are SAYING you have on the reels - could be a bad reel reader.
Title: Re: E 2000 reel or payout problem Post by: brianfink on March 24, 2011, 06:15:27 PM i donnt know that much about ballys but ive had similar problems with igt and it was just because the reel strips were in the wrong order
Title: Re: E 2000 reel or payout problem Post by: AnotherTech on March 25, 2011, 08:49:05 PM ive had similar problems with igt and it was just because the reel strips were in the wrong order X2 It sounds to me like the reel strips are either in the wrong order, or the wrong ones for the firmware installed. |