|
Title: INSTALLING NEW S2000 GAME KIT Post by: vegasbaby on March 31, 2011, 08:47:03 PM When installing a new game kit.After installing the stepper chips do i just do a key chip.Then install the sb chip.I just wanted to make sure i don't have to do a complete clear first,as I'm not changing the $1.00 amount i will be playing this game at.
Thanks for your help. Title: Re: INSTALLING NEW S2000 GAME KIT Post by: Foster on March 31, 2011, 09:08:54 PM All you need to do is install the base chip
If you are not changing any key chip config menu items no need to use the key chip. You will have to clear the Base chip CRC error that occurs with a few turns of the JP key and by closing and latching the door. If do decide to change any key chip config items do it after the new base chip is installed and any errors are cleared. Title: Re: INSTALLING NEW S2000 GAME KIT Post by: IFFV68 on April 01, 2011, 04:29:22 PM If you leave your $$ denomination & %'s the same you only need to, If you want to change any money value or game % then you need the proper key chip for your board.
Clear all credits, Turn off machine, Switch the SB chip, Turn on machine, Wait for the really loud noise, turn the reset key 4 times, push the test button for 2-3 seconds, close the door, wait, the reels will spin, Go to the menu, readjust the sound, #5 is the reel test, hopper, printer, etc. Did I miss anything. Oh, I always wear plastic gloves, Finger prints are not allowed on any of my glass or reel strips, hope this helps someone. |