|
Title: Bally 5000, wanting to swap MPU with working one, and error 82 problem Post by: jwpowell19 on March 31, 2011, 08:48:03 PM Hi All I just started my next project from my pile of S5000's and I Started this one up and immediatly got error 82, tried ram clear, still 82, so soldered a new battery in and When the battery was in I just had garbage on the displays, reset did nothing, reels did not move etc. So I am thinkin I might as well swap some mpu's from my other games. When I do, Do I just use my original PCB that connects into the top of the original MPU that has the 4 pin ribbon cable toat goes up near the battery. It is the PCb with the 4eproms and cable on the right in this pic. Thanks !
Title: Re: Bally 5000, wanting to swap MPU with working one, and error 82 problem Post by: jwpowell19 on March 31, 2011, 09:11:52 PM found I have no 24 volts. Looks like this controls the reel motors ??
|