|
Title: looking for a pinout for upper display to backplane Post by: lizzo54 on April 13, 2011, 01:39:09 AM Hi,
I have a upper display box, the style with the 1.5plus board. The harness connecting to the side is an 8 pin connector with 7 wires, the end that plugs into the backplane is a 10 pin connector with 5 wires. I believe this topbox was from a 360 machine, my machine is a 550 so my backplane input connector is a 8 pin. Can anyone help me figure out which wire goes where so I can make a new 8 pin connector that will work with my backplane? My other 550 uses the smaller Pluto board in the top box, and since that is a different board and configuration its of no help. Thanks in advance, Lenny :103- |