|
Title: Gamemaker - can't set hopper option Post by: msr986 on April 24, 2011, 10:29:14 PM I performed a successful eeprom clear on a buddies machine (I think!), but the option to set the hopper never came up. It just skipped the option. It defaults to "COIN" when the machine has no hopper. The machine HAS a hopper jumper plug installed. I tried this procedure with the plug installed, and without the plug installed. Any suggestions would be appreciated! :99-
Thanks! Title: Re: Gamemaker - can't set hopper option Post by: brianfink on August 19, 2011, 06:02:47 PM if you are not using a hopper after the machine is up and running just go into settup by turning the jackpot key go to limits and set hopper limit to zero
Title: Re: Gamemaker - can't set hopper option Post by: msr986 on August 19, 2011, 07:06:40 PM Thanks, I will certainly give that a try!
Title: Re: Gamemaker - can't set hopper option Post by: StatFreak on August 20, 2011, 06:28:36 AM With some mains, you'll also need to make sure that the button to the left of the hopper limit reads "Enabled".
Also, the door needs to be open when you turn the JP key to see all of the setup menus, otherwise you'll just get the bookkeeping menus on the left. |