Title: S2000 multimedia sounds won't stay saved after power off Post by: BR549 Auto Sales on April 29, 2011, 12:43:20 AM I have a Triple Stars and set the multimedia sounds to enhanced/preferred, I play it for awhile, but when I power off and power on again, the sounds go back to legacy. Also, it is set my game volume to 7 for the volume level, but it is not as loud as my others set to 7, in fact, it sounds a little "scratchy" when I insert cash money and when the rollup is sounding. I have the 47k resistors on all three speakers and have swapped the sound amp board in the top box. I do have other working multimedia boards, sound simms and other cpu boards if swapping those would help.
Thanks, David Title: Re: S2000 multimedia sounds won't stay saved after power off Post by: CaptainHappy on April 29, 2011, 03:56:10 AM Are you losing any other settings? First thing that comes to my mind is use a meter to check the battery voltage... :103-
CaptainHappy :95- Title: Re: S2000 multimedia sounds won't stay saved after power off Post by: Yoeddy1 on April 29, 2011, 04:10:03 AM Whoa...47k ohm or 47 ohm? If 47 ohm, volume at 7 or 8 should give you nice non-distorted sound. Watch that the resistor on the tray speaker isn't attaching itself to the magnet on the speaker. That will screw with your sound. I had to tape that wire down to the frame.
Jason Title: Re: S2000 multimedia sounds won't stay saved after power off Post by: BR549 Auto Sales on April 29, 2011, 04:12:36 AM 47 not 47k, my mistake. Yes, all 3 speakers and yes I do have the bottom one taped.
Title: Re: S2000 multimedia sounds won't stay saved after power off Post by: Yoeddy1 on April 29, 2011, 04:14:46 AM Yeah, I'd swap the mml2 and/or dsv SIMM as a starting point.
Jason Title: Re: S2000 multimedia sounds won't stay saved after power off Post by: BR549 Auto Sales on April 29, 2011, 04:18:02 AM ok, i'll try that. Are there any different sound simms I can use for the Triple Stars such as when using a Wild Thing or Mummy on a DD Deluxe or a Crystal 7s, or am I stuck with the common 42 simm?
Thanks, David Title: Re: S2000 multimedia sounds won't stay saved after power off Post by: Foster on April 29, 2011, 05:14:38 AM What MPU do you have?
if it is 504B or 1270 no need for resistors. Title: Re: S2000 multimedia sounds won't stay saved after power off Post by: cartman765 on April 29, 2011, 09:26:36 PM witch SG chip are you using because I had the same problem with my five times pay with SG000155's and had to use SG000363's to get to save my sound settings after turning off the machine.
Title: Re: S2000 multimedia sounds won't stay saved after power off Post by: Jim on April 30, 2011, 12:04:54 PM yes , that is your problem, earlier SG chips would do this, I even had some in the 200 series do this, mostly the the 100 series.
Jim |