New Life Games Tech Forums

Arcade Games, Pinball, Crane Games, Redemption Games and Other Stuff => Pinball Games => Topic started by: arakissun on May 05, 2011, 05:22:02 AM



Title: Time Warp want start up the program
Post by: arakissun on May 05, 2011, 05:22:02 AM
Hello everyone,I need you help.
Three days before I just bought Time Warp pinball for not much money,but with problems.First of all it have about 7 coils that were burned,and of course there TIP120s,was dead too.So I desolder these coils and replace the dead transistors.I don't have now new coils,so I leave the this like it's now.
The major problem for me(I think) is that the program not runinig.When I turn on the machine-lapms on backpanel and the lamps from two sides of the playfiled ligths up,but the lapms on playfiled wont start.When I begin too look the MPU board,I see that when turn on the pinball the two red LEDs just blink for a second and this is,not constant red light.So I remove the FLIPPER ROM 1,and again turn on-two red LED's lights constantly.When I turn back ROM 1 ,same result-blink for a second.Just for test I put FLIPPER ROM 2 on place where is FLIPPER ROM 1,and the two red LED's again lights constantly.So I think ROM 1 is bad.What can you tell me about it,is this rom that care for begining of the programs,and that's why lights on palyfield want start up and the for displays too
One more thing,when I remove ROM 1,I try the test of displays,where test 1,2,3....9 digits,the displays work,when I try Auto-up(from coin door)again work the test.So I think the CPU is ok,but you can tell me is that right.

I clean ROM 1 very well but with no result.

Thanks in advice


Title: Re: Time Warp want start up the program
Post by: arakissun on May 06, 2011, 11:14:00 AM
I made somw work on the MPU board,and now it switch in atract mode,all lapms lights,and the Hi-Score is 4500.But previous owner has been made some moding,that I cannot understand with the credit butoon and start button.I imidiatly remove this shit:).Can some one tell mi wich coloure wire is for credit button and wich is for start button or where I must look at the schematics-like nuber of connector?


Title: Re: Time Warp want start up the program
Post by: arakissun on June 27, 2011, 03:58:54 AM
After rebuld and fix,the pinball is now diasamble,because I don't have place for it:(
If some one want some parts I can give good price


Title: Re: Time Warp want start up the program
Post by: StatFreak on June 27, 2011, 10:47:07 AM
Hi arakissun :88-

I'm surprised that no one has responded to any of your posts to help you fix your two machines. :60-

Sorry that you weren't able to get this one running, but thanks for offering the parts to our members.

 :259- karma to you.

StatFreak :31-
:nlg-  Global Moderator