New Life Games Tech Forums

hey i am new to this site but have been told this is the place to go.hope someone out there can help.two separate problems 1st is while drilling out the lock on the ballys machine,to gain access to mother board,bit when to far and hit two chips,one of them I was able to bend and seat back in not so lucky with the second,broke off a leg.with that being said i need a replacement.the numbers on it are  v7px0010400-00   (37F5)07/31    L95-1635 it is a ballys game maker modle #VMPLODF56 ser.#981016562  manuf. date 10/98   2nd problem is with a different game it is a sigma Treasure Wheel SG 150 plus   numbers on the board are sg88m-2     120002 rev b  ok this one on power up will go to test mode wheels spin slow at that time then stops and noting else after that no code in pay out window nothing  mother board bad ? i am at a loss please help thank you, james

On your gamemaker, look at the board where the chip was originally seated and look for the number next to the socket, should be at the top of the chip socket (socket has a little indent in the top) The sigma, I assume the machine will not take coin or bills? what exactly is it not doing?

ok will look for #. and yes the sigma will not .only goes into self test on power up not even sure if it goes all the way thruogh full test then ,nothing

 :238- havasugameman :88-


v7px0010400-00 is one of your 10 game chips. I don't have any information on that game, so I can't tell you which it was. However, X games are the games that don't fit neatly into other categories. For example: Pick-Em poker, bingo, Win Pigs Fly, etc.

The Gamemaker should run without the chip, but you'll be missing one game. I'm guessing it was in slot P3.


StatFreak :31-


P.S. You can replace it with any Gamemaker game. Of course, if you liked that game, you can try to buy an exact replacement.

Topic moved to the Gamemaker board.

James (havasugameman), I suggest that you re-post your Sigma question in a new thread on the "Reel Games - Sigma" board since our Sigma experts might not pay attention to a thread called "Bally Gamemaker," even when it was on the tech board.


StatFreak :31-
:nlg-  Global Moderator