|
Title: Touchscreen Controllers in IGT iGames Post by: aklarry on May 28, 2011, 02:19:55 AM Anyone know how many different Touchscreen controllers are used in IGT IGames? I had one go down tonight and I checked in 4 other IGames and every one was different. Three were similar just a different cable going to the screen. The one I need had a single 8 pin plug to the screen all the others had different 16 pin plugs
Larry Title: Re: Touchscreen Controlers Post by: Forrhouse on May 28, 2011, 04:32:38 AM I believe that the touch screen controller in your picture is the 1st version of Touchscreen controller that IGT used due to the black molex SL series connector on it. An adapter that has a 15 pin vga type serial connector on it plugs into there should the type of monitor used require it. The 2nd, later type of Touchscreen controller that IGT uses has the 15 pin vga type serial connector built in. The third type of touchscreen controller that IGT uses is a smaller, rectangular, white, Microtouch box that has cable coming from each end. One end has a 15 pin vga type serial connector on it if I remember correctly. Kortek monitors use their own touch svreen board. These are all of the ones that I have seen. Hope this info helps.
E~ Title: Re: Touchscreen Controlers Post by: aklarry on May 29, 2011, 12:37:56 AM thanks for the quick reply. the other two I check one had the VGA plug and the other had a 16 pin big flat plug
Larry |