|
Title: Progressive Works... Wont Pay Post by: tjohnson3432 on May 31, 2011, 10:41:30 PM I have a ChamII that i have got working and it counts credits up, everything seems to work that should but when the jackpot got hit it did not pay out the progressive amount. I have read on it and tried a few different things and went through the test to see if it payed but when i put the credits on it and hit spin it added money to the progressive. I am not sure what setting i am missing, but i sure can not figure it out either. Some help would be great! Thanks to all you great people with the best advice ever!
Title: Re: Progressive Works... Wont Pay Post by: Foster on May 31, 2011, 11:08:51 PM What machine is the cham II in?
Did the machine go into a jackpot handpay? Also what are the F4 and F8 setting you used in the PSP software? Title: Re: Progressive Works... Wont Pay Post by: tjohnson3432 on June 02, 2011, 12:00:47 AM The progressive is in a Bally s6000 Silver and Gold. It did go to 4000 credits won, when it hit. The settings that i had with the PSP were M-05 for F4 and ms04 for F8. Thanks!!
Title: Re: Progressive Works... Wont Pay Post by: knagl on June 02, 2011, 01:12:08 AM Was 4,000 what the meter was at when the jackpot was hit, or is that the "standard" top award for that game? Did the meter reset when you turned the jackpot reset key, or did it just continue climbing from the amount it had already progressed to?
Title: Re: Progressive Works... Wont Pay Post by: Foster on June 02, 2011, 01:17:19 AM I am not a Bally guru, but MS04 is a setting for IGT.
PSP manual regarding Bally. Maybe the Bally guru's can comment as well Bally Older machines (E series) were only capable of one progressive JP, so they used the short coin, long JP method. Recommended machine type is M-00 or M-05. Newer machines (5000 and newer series) support two interface styles. One style is a relay board capable of up to three JPs. Recommended machine type is M-00 or M-05 if coin and JP0 are multiplexed on the same line, or M-02 if coin and JP0 are on separate lines. The other style interface is an RS-232 port. This is used with the Multicomm and supports multiple JPs and Nevada Reg. 14 signals. Recommended machine type is M-05 with machine serial set for MS01 Title: Re: Progressive Works... Wont Pay Post by: knagl on June 02, 2011, 09:05:50 PM the meter did show 4000 for the win, the progressive did not reset when i turned the key it just went up on the next spin. Thanks for the help So, in other words it did work (ie. the machine showed 4000 credits on its own display), but the progressive meter didn't reset after the jackpot was hit? Also, Tim (stormrider) just posted these as the correct settings for a Bally progressive -- they sound right to me, too. I'll have to fire up my PSP laptop to double check to be 100% sure that they match the Bally I recently programmed, however. F3= single F4 =M-08 F8 =MS00 Title: Re: Progressive Works... Wont Pay Post by: StatFreak on June 02, 2011, 09:19:44 PM the meter did show 4000 for the win, the progressive did not reset when i turned the key it just went up on the next spin. Thanks for the help So, in other words it did work (ie. the machine showed 4000 credits on its own display), but the progressive meter didn't reset after the jackpot was hit? Also, Tim (stormrider) just posted these as the correct settings for a Bally progressive -- they sound right to me, too. I'll have to fire up my PSP laptop to double check to be 100% sure that they match the Bally I recently programmed, however. F3= single F4 =M-08 F8 =MS00 :212- You might also want to check out these threads: CHAMII+ & Bally S-6000 Settings (http://newlifegames.net/nlg/index.php?topic=6738.0) for the S6000, but a long thread. CHAMII+ & Bally S-5500 Settings (http://newlifegames.net/nlg/index.php?topic=7606.0) for the S5500, but short and sweet. I think most of the settings are the same (not the wiring, though.) Stat :31- Title: Re: Progressive Works... Wont Pay Post by: stayouttadabunker on June 02, 2011, 11:54:37 PM I don't think those Mikohn threads will ever, EVER get condensed a little huh? :96-
One wouldn't know where to start? I pity anyone trying to plow through all that info like I did when I got one.... :25- I think it took me about 347 gray hairs to digest it all...then I later forgot it all!!!!!!!!!! Title: Re: Progressive Works... Wont Pay Post by: tjohnson3432 on June 05, 2011, 04:00:25 PM Finally GOT IT! Just a few changes of this and that and BooM. Thanks again for all the help! :3-
Title: Re: Progressive Works... Wont Pay Post by: stayouttadabunker on June 05, 2011, 11:34:17 PM ...Just a few changes of this and that and BooM. ... uh...what blew up? :96- Glad you got it working! Another happy NLG'er!!! :267- |