|
Title: Need to upgrade WBAs with flash chips in them HELP !!! Post by: Slot Docs on June 23, 2011, 08:46:40 PM Hey guys and galls,
I have a bunch of WBA validaters with Flash eproms in them that I need to upgrade for various different games, IGTs, Williams mostly. I understand that there was a flash cable and software for PC, but I have not been able to Locate one or any information on them. Anyone know the pin out to make the cable ? also anyone with any information as to where to get the software etc would be very appreciated. Thanks in advance Slot Docs Title: Re: Need to upgrade WBAs with flash chips in them HELP !!! Post by: Neonkiss on June 23, 2011, 10:35:59 PM Looks like you got your answer here.
http://forum.jcmglobal.com/viewtopic.php?f=4&t=67 (http://forum.jcmglobal.com/viewtopic.php?f=4&t=67) Re: Upgrade Flash WBAs Postby jcmtech ยป 22 Jun 2011, 09:15 The program to download WBAs can be downloaded from the JCM web site at http://www.jcmglobal.com/Libraries/Soft ... cation.zip You will need a power supply with an RS-232 conversion board such as the PS75-002 which can be ordered through your Distributor, JCM part Number 701-000148R. The instructions for downloading software are in the manual located on the web site at http://www.jcmglobal.com/Libraries/Prod ... .sflb.ashx Downloading is covered in section A on page A-10. To obtain the latest version of software contact your JCM sales rep or distributor. Also try the attached manual Title: Re: Need to upgrade WBAs with flash chips in them HELP !!! Post by: Slot Docs on June 24, 2011, 10:25:51 PM Thanks for the info there Neon I was just heading there to check for replies
|