|
Title: Bally 6000 Ram clear Post by: keystone9 on June 25, 2011, 10:28:27 PM Just did a ram clear on a new batch of Bally 6000's and it cleared but when I get to the part of the date ant time it just scrolls fast thru the date and time numbers. I can not get out of this to finish the clear and set options. Any help? Thanks Bill
Title: Re: Bally 6000 Ram clear Post by: FORDSBS on June 25, 2011, 10:31:20 PM Don't know but if were me I'd try doing a few complete clears.
I never had on that did that. Does it do it on all machines or just one? Ford Title: Re: Bally 6000 Ram clear Post by: FORDSBS on June 25, 2011, 10:34:45 PM Did you try & push service to try & get to next part of setup?
Title: Re: Bally 6000 Ram clear Post by: proten on June 25, 2011, 10:41:53 PM Could you have a stuck button?
Title: Re: Bally 6000 Ram clear Post by: FORDSBS on June 25, 2011, 10:44:46 PM Could you have a stuck button? Good answer. Could be the bet max button. Title: Re: Bally 6000 Ram clear Post by: keystone9 on June 25, 2011, 10:47:07 PM Just got started on a bunch of Ballys including some Monte Carlos with the 10 bonus spins and I am trying to nail down the issues so I can breeze thru the rest. I did try everything you mentioned but no good. Never came across this one before. I'm thinking a jumper or dip switch setting. Has a 24 hour time clock instead of 12 hour. Good to hear from you Ford. Bill
Title: Re: Bally 6000 Ram clear Post by: FORDSBS on June 25, 2011, 10:49:16 PM Same to you Bill.
I don't think a dip switch would cause that. Title: Re: Bally 6000 Ram clear Post by: FORDSBS on June 25, 2011, 10:57:29 PM I can't find anything for 24 hr. time.
I don't think so but dip switch for market code might if it is from military or something like that. I'm not thinking straight. Mine are also for 24 hr. OLD AGE SUCKS. Title: Re: Bally 6000 Ram clear Post by: FORDSBS on June 25, 2011, 11:06:11 PM I'd put that one to the side and try another. See if that one does the same.
Title: Re: Bally 6000 Ram clear Post by: keystone9 on June 25, 2011, 11:13:10 PM Good idea. It's been a long day. Bill
Title: Re: Bally 6000 Ram clear Post by: FORDSBS on June 25, 2011, 11:18:28 PM Maybe one of the pros will chime in with an answer.
Title: Re: Bally 6000 Ram clear Post by: FORDSBS on June 26, 2011, 12:13:43 AM I can't believe no one had advice.
Come on, help Bill out. Title: Re: Bally 6000 Ram clear Post by: FORDSBS on June 26, 2011, 03:23:33 PM :263-
I'm waiting to see what problem is. Ford Title: Re: Bally 6000 Ram clear Post by: a69mopar on June 26, 2011, 03:53:47 PM Could you have a stuck button? This is almost always a bad microswitch or stuck button. Proten was on the right track. I would check the bet 1 first.There are a lot of empty posts in this thread, took some time to scroll down. w Title: Re: Bally 6000 Ram clear Post by: keystone9 on June 26, 2011, 04:29:34 PM That makes a lot of sense to me. I will check that out within the next couple of days when I get some time to. Thanks Bill
Title: Re: Bally 6000 Ram clear Post by: keystone9 on June 26, 2011, 10:22:05 PM Got it straightened out. Thanks to all the help, it was a stuck spin reels switch. Replaced the switch and Bingo. I can't say enough how great it is for all the help from good people of this site. Bill
Title: Re: Bally 6000 Ram clear Post by: a69mopar on June 26, 2011, 10:25:31 PM Great, thanks for letting us know.
W Title: Re: Bally 6000 Ram clear Post by: FORDSBS on June 26, 2011, 10:28:29 PM Glad you got it going. Pretty close to bet max button.
Ford |