|
Title: Problems after removing green battery Post by: slotsx2 on June 30, 2011, 11:21:29 AM I have an enhanced MPU on my S2000. It was running fine until I removed the green battery everyone says you dont need and should remove. I removed it, and now when I put the MPU back in and power it up, only the top amber light flashes.
The enhanced board has 2 green lights above the top 2 amber lights and they light up as usual, but only the first amber lights up and it flashes on and off. Whats up with that? Title: Re: Problems after removing green battery Post by: PLUNGER BOY on June 30, 2011, 12:11:37 PM The enhanced board needs the green battery to work put it back in
Title: Re: Problems after removing green battery Post by: idesign on June 30, 2011, 12:19:31 PM The enhanced board needs the green battery to work put it back in What he said ^^^^^^^^^^^^^ You should not remove the green battery on the enhanced S2000 boards. You can remove them on the original 500 series boards. Title: Re: Problems after removing green battery Post by: slotsx2 on June 30, 2011, 02:27:10 PM Thanks, I had a feeling that was it.
If one isn't sure, one should always ask first before doing something they aren't sure about. Someone insisted I should remove the green batteries because of leakage. Now I know why I felt hesitant about removing the battery on the enhanced board.... ALWAYS trust your gut feeling!! Thanks again! |