|
Title: code 64-1 Post by: longstar1 on December 27, 2008, 10:25:39 PM This code keeps coming up on a Top Dollar BarCrest. I cannot get it to clear. Checked all the wiring and everything seems to be plugged in tight. Any suggestions appreciated greatly. :103-
Title: Re: code 64-1 Post by: cfh on December 28, 2008, 02:13:52 AM This is a communications error between the lower IGT computer
and the upper Barcrest computer. Chances are the upper Barcrest power supply is not working. This is easy to check as the Barchrest CPU has a red LED on it (behind the power supply) If the LED is lit, chances are good the barcrest P.S. is good. If the LED is off, the power supply is bad. I have found many cracked solder joints on this power supply. there are two upright cards on the P.S. which are about 2"x2". Where they attach to the main P.S. board the solder joints often crack. This is a bitch to resolder as the whole P.S. will need to be taken apart to do it. Title: Re: code 64-1 Post by: tollguy316 on December 28, 2008, 11:57:37 AM I had that problem on my Barcrest game last week ( I've had it a few times before actually ). CHF is exactly right ; it is a communication error. I usually get it when I move my game around or even sometimes from opening and closing the door alot. Try this. Take off the top glass . Loosen the 2 black knobs that hold the top unit in place. Slide the inner part of the top unit towards you 2-3 inches and push it firmly back in , Hold the unit in and tighten the 2 knobs .... Bill
|